Forklift Sweeper - Economy Model

Main features

Light duty and occasional usage

3mm thick steel shroud for durability

5 rows of 3mm diameter polypropylene replaceable bristles x 310mm deep for effective sweeping

Simple and effective sweeping action designed to reduce labour costs and increase productivity

Quick and easy fitment on and off forklift forks via two safety screw clamps

No moving parts, offering low maintenance and service costs

Integral fitted lugs to allow for retro fitment of magnet or swivel hitch at a later date - ask if required

Safe and efficient to help reduce accident risks of personnel in the yard or warehouse

'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations

MAINTENANCE of Sweepers

The  Sweepers should be inspected every time it is used but no later than weekly for the general condition with particular attention paid to: 

All weld points, Wear and distortion of fork pockets and swinging arms, Any damaged parts, and the thumb screws and pivots – Any problems found must be rectified immediately.

Check for general surface rusting especially in critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.

All pivots and thumbscrews must be kept lightly greased.

This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by The HSE.

"Main features

 Light duty and occasional usage

 3mm thick steel shroud for durability

 5 rows of 3mm diameter polypropylene replaceable bristles x 310mm deep for effective sweeping

 Simple and effective sweeping action designed to reduce labour costs and increase productivity

 Quick and easy fitment on and off forklift forks via two safety screw clamps

 No moving parts, offering low maintenance and service costs

 Integral fitted lugs to allow for retro fitment of magnet or swivel hitch at a later date - ask if required

 Safe and efficient to help reduce accident risks of personnel in the yard or warehouse

 'CE' marked and supplied with Certificate of Conformity to meet Health & Safety Regulations"

"MAINTENANCE of Sweepers

 The Sweepers should be inspected every time it is used but no later than weekly for general condition with particular attention paid to: 

 All weld points, Wear and distortion of fork pockets and swinging arms, Any damaged parts, and the thumb screws and pivots – Any problems found must be rectified immediately.

 Check for general surface rusting especially in critical areas should be treated with proprietary inhibitors, primers and paint on a regular basis.

 All pivots and thumbscrews must be kept lightly greased.

 This product is certified for six (6) months from the date of manufacture after which it is the customer’s responsibility to have the product re-tested at an approved testing facility or inspected and logged in a register by a competent person as advised by The HSE."