Site Equipment Civil Eng

Concrete Manhole Pins are usually used in sets of three to lift concrete manhole chambers. This style of concrete lifting Pins are supplied with Large flat washer and retaining pins - Other style of pins available on request

The Probst Telescopic Screeding System TAS-UNI can be classed as the universal "all-rounder" screeding system for both large and small construction sites. perfect for screeding long wide areas quickly. The Probst TAS-UNI is designed with a bigger profile which helps move and screed larger and more rough screeding materials.

These quality manufactured Scissor action block grabs designed with personnel safety in mind are commonly used to lift palletized brick or slab or concrete produce such as kerb stones, paving stones, slabs, steel strapped bricks, etc - The Rubber lined pads help minimize damage to loads and reduce marking or breakages

Probst FXAH 120 Pro Lifter, designed for landscaping and tiling professionals that needs a reliable portable vacuum lifter that can securely grab almost any surface with ease. Can even lift rough, porous and wet surfaces perfect for landscapers and tilers

Kassel Kerb Lifter is a quality Kerb Grab that makes very light work when you need to lift and transport large pre-cast concrete products, kerbstones, bus stop kerbs and similar in a safe and efficient manner.

Probst BZ Kerb Stone Handle ideal for lifting and transporting Kerb Stones, Edging Stones, Concrete Gutters and paving materials. Can also be used with natural kerb stones and other landscaping elements.

Probst GH Gully Hook with chain sling. Designed to make lifting, handling and installing concrete gullies easier, safer and quicker. This quality manufactured handy solution fits snugly in the gully spout without the need to remove the rodding eye cover or to damage the gasket.

Probst RVD Concrete Pipe Lifter. Universal excavator attachment enabling large steel reinforced concrete pipes to be unloaded, transported, and installed on-site.

Probst EASYGRIP EXG Border Stone Handle is a mechanical grab and lifter, suitable for handling parallel, plane, and non-conical concrete elements, such as block steps, border stones, kerb stones, and slabs

Probst FTZ Universal Mechanical Grab designed for handling standard concrete blocks, sandstone blocks and most prefabricated concrete elements safely and securely.

Probst FTZ Mechanical Grab with interchangeable grippers, designed for lifting and handling very wide concrete blocks, concrete Lego blocks, sandstone blocks and even Ashlar rocks, boulders and other prefabricated concrete elements

Probst FTZ-BB Grab for Prefabricated Concrete Products was specifically designed for handling and moving kerb stones with high concave sections, such as bus stops, Kassel Kerbs, Trief Kerbs and other prefabricated concrete blocks safely and securely. 

Probst Basicline Kerb Stone Handles is ideal for lifting and transporting Kerb Stones, Edging Stones, Concrete Gutters and paving materials. Can also be used with natural kerb stones concrete fence panel posts and other landscaping elements.

Probst Mechanical Concrete Gully Lifter is the perfect solution for loading and offloading Gullies from transport and delivery lorries safely and quickly, can be attached to an Excavator, Backactor, Crane, or Hiab. Designed to fit snugly on the gully and will readily accommodate the spout.

The Probst Round grab is a simple mechanical clamp designed for lifting, transporting, and laying pipes and other round elements. Manufactured with an ultra-slim body which helps when laying round pipes within very slender trenches.

The Probst RG SAFELOCK Round grab range of pipe lifting equipment for both transporting and laying concrete pipes. SAFELOCK model range, the clamping force of the claws is maintained fully in all cases, even if the carrier is operated incorrectly.

The Probst Round Grab RG20/85 SAFELOCK for lifting, transporting, and laying concrete pipes on construction sites. SAFELOCK design - The clamping force of the claws is maintained fully in all cases, even if the carrier is operated incorrectly.

Probst SG PGL2 Scissor Block Grab is an industry-leading mechanical Block Grab used for lifting and transporting unpalletized building materials up to 1800Kgs such as breeze blocks, bricks, and kerb stones around construction or building sites. 

The Probst TSZ-UNI Block Gripper with universal handles is suitable for handling bus stop kerbstones, Kassel kerbs and Trief kerbs as well as other unusually shaped concrete steps, standard kerb stones, "L" stones and is also ideal on similar larger concrete products. The Concrete Step Handles with a large opening range is used commonly for large stone wall blocks with any width up to 600mm

Probst VPH 150 Vacuum Power Handy Slab Lifter - Powerful battery-powered professional slab lifter for simple and easy lifting, transporting, and positioning of kerb stones and slabs such as granite or high-quality concrete elements up to 150 kg weight.

VZ1 Probst Kerbstone laying Clamp is a two-man laying clamp that is especially suitable for handling concrete kerbstones, by hand or via a digger/telehandler, etc. Designed with angular support on one side which helps in the final positioning against the kerbstone already in place - This enables extremely narrow joints and leaves a professional straight line of kerbstones

Unikey is a Manhole Cover Lifting & Stopcock Interchangeable Key Set with a lifting capacity of 250 kg and comprising interchangeable tips that can be easily and quickly swapped over.

Probst Manhole and Cone Chain Clamp SRG is a universal and extremely lightweight 3-leg clamp for lifting, transporting, and installing of large manhole rings, concrete cone elements, and well rings as per DIN4034.

Auto-Locking Telehandler Skip (1250 Litre / 2000Kgs). Delivering the ultimate safety and efficiency by automatically locking/unlocking from behind the fork heels. This allows the driver to remain within the safety of the telehandler cab.