Get in touch01384 986 026

We Accept:

Grade 8 Pivoting Eyebolt with load ring

Key notes for ordering:

Supplied tested with certification - Ready to use from the box. Choose standard thread length or extended thread

Estimated lead time:1 Day

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

Grade 8 Pivoting Eyebolt with load ring

Brand:

Capacity

300Kgs up to 20,000Kgs
(0.3 tonne to 20 tonne)

Description

Grade 8 Pivoting Eyebolt with large load ring offers many advantages over standard eyebolts due to its ability to rotate, meaning the correct lifting angle is used when an object is being lifted. The large load ring also help to connect direct to chain slings without the aid of shackles.

£22.32 ex VAT

£26.78 inc VAT

Related products

RUD VLBG-PLUS Load Ring, Metric thread

VLBG-PLUS

RUD VLBG-PLUS Load Ring, Metric thread is ideal for bolting applications. Classed as the premier make of swivel lifting point. These are top quality. Giving full WLL in all directions, plus many more design features.

£76.97 ex VAT

£92.36 inc VAT

Grade 8 Pivoting Eyebolt with large load ring offers many advantages over standard eyebolts due to its ability to rotate, meaning the correct lifting angle is used when an object is being lifted. The large load ring also help to connect direct to chain slings without the aid of shackles 

Grade 8 Steel, Quenched & Tempered
Powder coat Finish to body
Safety Factor 4-1
Same WLL at both zero and 90 degrees
Supplied fully tested with certification

We offer two sizes - Standard thread length and extended thread length

Standard Shank
Model
Thread Size
Thread Length
WLL 0° &  90°
Link Dimensions
Weight
XN173-M08
M8
10.4mm
0.3t
52.5 x 35mm
0.06Kgs
XN173-M10
M10
16mm
0.63t
52.5 x 35mm
0.11Kgs
XN173-M12
M12
18mm
1t
54 x 40mm
0.18Kgs
XN173-M14
M14
21mm
1.2t
54 x 40mm
0.18Kgs
XN173-M16
M16
24mm
1.5t
54 x 40mm
0.30Kgs
XN173-M18
M18
26mm
2t
80 x 54mm
0.30Kgs
XN173-M20
M20
30mm
2.5t
80 x 54mm

0.45Kgs

XN173-M24
M24
35mm
4t
94 x 54mm
0.95Kgs
XN173-M27
M27
38mm
4t
106 x 73mm
1.76Kgs
XN173-M30
M30
48mm
5t
106 x 73mm
1.76Kgs
XN173-M36
M36
54mm
8t
106 x 73mm
2.65Kgs
XN173-M42
M42
63mm
15t
155 x 104mm
4.06Kgs
XN173-M48
M48
74mm
20t
155 x 104mm
6.38Kgs
Extra Long Shank
Model
Thread Size
Thread Length
WLL 0° &  90°
Link Dimensions
Weight
XN173-M08EL
M8
76mm
0.3t
52.5 x 35mm
0.33Kgs
XN173-M10EL
M10
96mm
0.63t
52.5 x 35mm
0.43Kgs
XN173-M12EL
M12
114mm
1t
54 x 40mm
0.95Kgs
XN173-M12EL
M16
194mm
1.5t
54 x 40mm
1.17Kgs
XN173-M20EL
M20
187mm
2.5t
80 x 54mm
2.24Kgs
XN173-M24EL
M824
222mm
4t
94 x 54mm
2.61Kgs
Grade 8 Steel, Quenched & Tempered
Powder coat Finish to body
Safety Factor 4-1
Same WLL at both zero and 90 degrees
Supplied fully tested with certification

We offer two sizes - Standard thread length and extended thread length

Standard Shank
Model
Thread Size
Thread Length
WLL 0° &  90°
Link Dimensions
Weight
XN173-M08
M8
10.4mm
0.3t
52.5 x 35mm
0.06Kgs
XN173-M10
M10
16mm
0.63t
52.5 x 35mm
0.11Kgs
XN173-M12
M12
18mm
1t
54 x 40mm
0.18Kgs
XN173-M14
M14
21mm
1.2t
54 x 40mm
0.18Kgs
XN173-M16
M16
24mm
1.5t
54 x 40mm
0.30Kgs
XN173-M18
M18
26mm
2t
80 x 54mm
0.30Kgs
XN173-M20
M20
30mm
2.5t
80 x 54mm

0.45Kgs

XN173-M24
M24
35mm
4t
94 x 54mm
0.95Kgs
XN173-M27
M27
38mm
4t
106 x 73mm
1.76Kgs
XN173-M30
M30
48mm
5t
106 x 73mm
1.76Kgs
XN173-M36
M36
54mm
8t
106 x 73mm
2.65Kgs
XN173-M42
M42
63mm
15t
155 x 104mm
4.06Kgs
XN173-M48
M48
74mm
20t
155 x 104mm
6.38Kgs
Extra Long Shank
Model
Thread Size
Thread Length
WLL 0° &  90°
Link Dimensions
Weight
XN173-M08EL
M8
76mm
0.3t
52.5 x 35mm
0.33Kgs
XN173-M10EL
M10
96mm
0.63t
52.5 x 35mm
0.43Kgs
XN173-M12EL
M12
114mm
1t
54 x 40mm
0.95Kgs
XN173-M12EL
M16
194mm
1.5t
54 x 40mm
1.17Kgs
XN173-M20EL
M20
187mm
2.5t
80 x 54mm
2.24Kgs
XN173-M24EL
M824
222mm
4t
94 x 54mm
2.61Kgs
In-service Inspection and Maintenance
Maintenance requirements are minimal. Keep eyebolts clean, protect from corrosion and protect threads from damage. Do not attempt to straighten bent eyebolts or re-cut threads.
Regularly inspect eyebolts and, in the event of the following defects, refer the eyebolt to a Competent Person for thorough examination: illegible markings; distortion; worn, or bent shanks and threads; incomplete or incorrectly formed threads; damaged eyes; nicks, gouges, cracks, corrosion or other defects.


In the UK, the Lifting Operations & Lifting Equipment Regulations (LOLER) make it clear that all shackles and eyebolts used for lifting purposes are lifting accessories. They should therefore be subject to a thorough examination by a competent person at least every six months. Regardless of the prevailing legislation, the Lifting Equipment Engineers Association (LEEA) strongly recommends that this policy is adopted by all those with responsibility for ensuring the safe condition of lifting equipment.
If you are in any double please contact Ultimate Lifting Solutions to discuss your LOLER / Thorough Examination requirements, we have trained engineers that can carry out all your inspection / services either on-site or in-house.

Write a review

More products from category:

Lifting Accessories

10mm Skip Chain - Grade 8

SLC10

Replacement 10mm Skip Chain - Grade 8. The ULS Lifting 10mm Skip Lorry chain replaces the worn-out Skip Chains commonly found on Skip Lorries in the UK. Just count up the links of the chain, and we can supply the exact length required. supplied fully tested with certification

£9.98 ex VAT

£11.98 inc VAT

10mm Skip Chain Connectors

SCC10

10mm Skip Chain Connectors for connecting the skip chains to the top mast of the skip lorry. These 10mm Grade 8 Skip Connectors are easy to connect to the chains, using the supplied pins. Rated to 3.15 tonne per skip connector.

£5.98 ex VAT

£7.18 inc VAT

13mm Skip Chain - Grade 8

SLC13

Replacement 13mm Skip Chain - Grade 8. The ULS Lifting 13mm Skip Lorry chain can be used to replace the worn-out Skip chains. Just count up the links of the chain, and we can supply the exact length required. supplied fully tested with certification

£16.98 ex VAT

£20.38 inc VAT

13mm Skip Chain Connectors

SCC13

13mm Skip Chain Connectors for connecting the skip chains to the top mast of the skip lorry. These 13mm Grade 80 Skip Connectors are easy to connect to the chains, using the supplied pins. Rated to 5.3 tonnes per skip connector.

£8.50 ex VAT

£10.20 inc VAT

16mm Skip Chain - Grade 8

SLC16

Replacement 16mm Skip Chain - Grade 8. The ULS Lifting 16mm Skip Lorry chain can be used to replace the worn-out Skip chains on the larger capacity Skip Loaders. Can be supplied to the exact length if required. Supplied fully tested with certification

£24.98 ex VAT

£29.98 inc VAT

16mm Skip Chain Connectors

SCC16

16mm Skip Chain Connectors for connecting the skip chains to the top mast of the skip lorry. These Skip connectors are only used on the larger capacity Skip Loaders and can only be used with 16mm Skip chain rated to 8 tonne

£12.98 ex VAT

£15.58 inc VAT

BO 5107900 - Bohle Professional Glass Cleaner

BO 5107900

Price is for a 12 cannister box size.

Can be used for glass, smooth plastic surfaces, mirrors, car windows, tiles · for workshop and home, showcases and display windows · sparkling surfaces without streaking · environmentally sound propellant Ideal for cleaning glass parts after fusing.

£44.98 ex VAT

£53.98 inc VAT

Camlok 92 Series Vertical Plate Clamp

92 Series

Camlok Vertical Plate Clamps (92 series). Primarily used for transporting sheet metal and steel plates in the vertical position - The 92 series is manufactured in the UK offering a top quality / performing clamp - spare parts are ready off the shelf.

£188.88 ex VAT

£169.98 ex VAT

£203.98 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up