Camlok
Camlok

92 Series
92 series Camlok Vertical Plate Clamps - Primarily used for transporting sheet metal and steel plates in the vertical position - The 92 series is manufactured in the UK offering a top quality / performing clamp - spare parts are ready off the shelf.
£151.98 ex VAT
£182.38 inc VAT

CH
The Camlok CH Industry standard Horizontal Plate clamps have been specifically designed to be used in pairs for lifting and transporting either single or bundles of steel plates as long as the minimum thickness is 5mm. The CH range are manufactured in the UK offering a top quality / performing clamp - Spare parts are ready off the shelf.
£211.21 ex VAT
£253.45 inc VAT

CLB
The Camlok CLB Container Lifting Lugs are our most popular range of lugs for lifting containers using the side lifting pockets on all standard containers. The main safety feature for this range is the fact that once fitted they can not be accidentally released due to the spring-loaded locking bolt
£513.99 ex VAT
£616.79 inc VAT

CLT
The Camlok CLT Container Lifting Lugs are our most popular range of lugs for lifting containers from the top Lifting pockets. this configuration allows for the transportation of containers using a container lifting frame (Lifting Slings Required) The main safety feature for this range is that they lock into place by simply rotating the lug through 90°.
£569.98 ex VAT
£683.98 inc VAT

CY
Camlok CY Hinged Vertical Plate Clamp. Used to lift plates from horizontal & transport and relocate vertically in metal racks. The CY range of plate clamps are manufactured in the UK offering a top quality / performing clamp - Spare parts are ready off the shelf.
£267.39 ex VAT
£320.87 inc VAT

CZ
CZ Camlok Vertical Plate Clamps. Heavy Duty and Robust range. Welded shell construction - Primarily used for transporting sheet metal and steel plates in the vertical position - The CZ range are manufactured in the UK offering a top quality / performing clamp - Spare parts are ready off the shelf.
£189.98 ex VAT
£227.98 inc VAT

LJ
LJ Camlok Non-Marking Vertical Plate Clamps have been designed for lifting, turning and transporting structural steel plates, stainless steel, iron timber and aluminium without marking, damaging or leaving indentations on the surface.
The LJ range is manufactured in the UK offering a top quality/performing clamp - spare parts are ready off the shelf
£368.32 ex VAT
£441.98 inc VAT

CR
Camlok Single Rail Clamps are designed to fit the most available rail profiles currently in use and lift them securely and safely. The clamp locks onto the rail head via a lever-operated spring mechanism - can be supplied with only the lifting eye or short lifting chain assembly. A typical application would be with an Iron Man and Pull-Lift
£727.29 ex VAT
£872.75 inc VAT

TTB
The Camlok TTB Big Bag Lifter was designed to lift and transport large and bulk bags safely and securely. Loved by builders yards and on construction sites for relocating 1 tonne bulk bags of gravel or sand and similar goods
£349.98 ex VAT
£419.98 inc VAT