RUD VWBG-V Load Ring, Metric thread
Key notes for ordering:
Supplied tested with certification - Ready to use from the box
Estimated lead time:1 Day
Please call us if you need this item sooner
& COLLECT
delivery
DELIVERY
(Call us)
Seen this product cheaper elsewhere?
We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.
Price match
promise
RUD VWBG-V Load Ring, Metric thread
Brand:
Capacity
300Kgs up to 5,000Kgs
(0.3t to 5t)
M8 to M30
Description
Rud VWBG-V Load Ring for bolting. 360° rotation with Ball bearing for shock-free rotating & turning with less friction. Classed as the premier makes of the swivel lifting point. These are top quality. Suspension ring with an enlarged pivoting area, plus many more design features.
Add to cart
Add to quoteRelated products
RUD VWBG Load Ring, Metric thread
VWBG
Rud VWBG Load Ring for bolting. 360° rotation with Ball bearing for shock free rotating & turning with less friction. Classed as the premier make of swivel lifting point. These are top quality. Suspension ring with enlarged pivoting area, plus many more design features.
£409.85 ex VAT
£491.82 inc VAT
RUD VRS-F Starpoint Eye Bolt, Metric Thread
VRS-F Starpoint
Rud VRS-F Starpoint compact designed swivel eyebolt with 360° rotation c/w easy fit key for easy assembly and disassembly. The STARPOINT® removes the chance of bent eyes, backed out threads, or over-tightening which would cause unnecessary stress on the stem.
£44.90 ex VAT
£53.88 inc VAT
Rud VWBG-V Load Ring for bolting. 360° rotation with Ball bearing for shock-free rotating & turning with less friction. Classed as the premier makes of swivel lifting point. These are top quality. Suspension ring with an enlarged pivoting area, plus many more design features
A comprehensive range of WLL 0.3 t-6 t / 7.5 t-50 t.
Clear marking of the minimum WLL for all loading/directions. Higher WLL is possible when location and installation are optimized.
Rotatable at nominal WLL, 90° to the bolt-on direction.
Variable bolt lengths are available for tapped or through holes.
VWBG-V: Non-removable special bolt (this reduces the risk of improper standard bolts).
VWBG-V: RUD bolts with special corrosion protection Corrud-DT.
Large distance between bolt-on surface and load to avoid damage.
| Model | Capacity | Thread | RUD Order Ref No | Weight | Thread Length |
| VWBG - V | 0.3t | M8 | 7103720 | 0.18 Kgs | 13mm |
| VWBG - V | 0.45t | M10 | 7103715 | 0.29 Kgs | 17mm |
| VWBG - V | 0.6t | M12 | 7100180 | 0.41 Kgs | 21mm |
| VWBG - V | 1.0t | M14 | 8600337 | 0.63 Kgs | 21mm |
| VWBG - V | 1.3t | M16 | 7100430 | 0.59 Kgs | 25mm |
| VWBG - V | 1.8t | M18 | 8600338 | 1.18 Kgs | 27mm |
| VWBG - V | 2.0t | M20 | 7100800 | 1.42 Kgs | 33mm |
| VWBG - V | 2.0t | M22 | 8600334 | 1.45 Kgs | 33mm |
| VWBG - V | 3.5t | M24 | 7100640 | 2.63 Kgs | 40mm |
| VWBG - V | 3.5t | M27 | 8600335 | 2.65 Kgs | 41mm |
| VWBG - V | 5t | M30 | 7100650 | 5.09 Kgs | 50mm |
A comprehensive range of WLL 0.3 t-6 t / 7.5 t-50 t.
Clear marking of the minimum WLL for all loading/directions. Higher WLL is possible when location and installation are optimized.
Rotatable at nominal WLL, 90° to the bolt-on direction.
Variable bolt lengths are available for tapped or through holes.
VWBG-V: Non-removable special bolt (this reduces the risk of improper standard bolts).
VWBG-V: RUD bolts with special corrosion protection Corrud-DT.
Large distance between bolt-on surface and load to avoid damage.
| Model | Capacity | Thread | RUD Order Ref No | Weight | Thread Length |
| VWBG - V | 0.3t | M8 | 7103720 | 0.18 Kgs | 13mm |
| VWBG - V | 0.45t | M10 | 7103715 | 0.29 Kgs | 17mm |
| VWBG - V | 0.6t | M12 | 7100180 | 0.41 Kgs | 21mm |
| VWBG - V | 1.0t | M14 | 8600337 | 0.63 Kgs | 21mm |
| VWBG - V | 1.3t | M16 | 7100430 | 0.59 Kgs | 25mm |
| VWBG - V | 1.8t | M18 | 8600338 | 1.18 Kgs | 27mm |
| VWBG - V | 2.0t | M20 | 7100800 | 1.42 Kgs | 33mm |
| VWBG - V | 2.0t | M22 | 8600334 | 1.45 Kgs | 33mm |
| VWBG - V | 3.5t | M24 | 7100640 | 2.63 Kgs | 40mm |
| VWBG - V | 3.5t | M27 | 8600335 | 2.65 Kgs | 41mm |
| VWBG - V | 5t | M30 | 7100650 | 5.09 Kgs | 50mm |
Also available in Metric Fine Thread, UNC and BSW-Whitworth imperial Threads.
In-service Inspection and Maintenance
Maintenance requirements are minimal. Keep eyebolts clean, protect from corrosion and protect threads from damage. Do not attempt to straighten bent eyebolts or re-cut threads.
Regularly inspect eyebolts and, in the event of the following defects, refer the eyebolt to a Competent Person for thorough examination: illegible markings; distortion; worn, or bent shanks and threads; incomplete or incorrectly formed threads; damaged eyes; nicks, gouges, cracks, corrosion or other defects.
In the UK, the Lifting Operations & Lifting Equipment Regulations (LOLER) make it clear that all shackles and eyebolts used for lifting purposes are lifting accessories. They should therefore be subject to a thorough examination by a competent person at least every six months. Regardless of the prevailing legislation, the Lifting Equipment Engineers Association (LEEA) strongly recommends that this policy is adopted by all those with responsibility for ensuring the safe condition of lifting equipment.
If you are in any double please contact Ultimate Lifting Solutions to discuss your LOLER / Thorough Examination requirements, we have trained engineers that can carry out all your inspection/services either on-site or in-house.
The RUD Group is a dynamic and modern family group, that is active worldwide. Our goal is continuous, profitable growth – with serious consideration for the careful treatment of our natural resources and our environment.
We are striving for a clear leadership position with our products and services in our market segments based on organisational and operational excellence.
With over 140 years of experience and, taking round steel chains as a basis, we develop future-oriented solution concepts with chain systems and components in diverse forms and for a wide range of applications.
We see our products as the result of our passion for creativity and perfection in our core competencies metal working, welding, heat treatment, surface technology and forging.
Long-term partnership with our customers, their satisfaction and trust in us are the heart of everything we do. We vouch for customer-oriented, innovative, value-added technology as well as consistent top quality and safety. That is our joint responsibility.
Through our actively practised, open and trusting corporate culture as well as our ongoing training and education, our international family enterprise is a motivated, energetic, flexible and competent team.
Our applied concept of Courtesy of Choice is reflecting the centuries-old philosophy that acknowledges differences while allowing them to exist together in harmony.
More products from category:
Lifting Accessories
BO 5107900 - Bohle Professional Glass Cleaner
BO 5107900
Price is for a 12 cannister box size.
Can be used for glass, smooth plastic surfaces, mirrors, car windows, tiles · for workshop and home, showcases and display windows · sparkling surfaces without streaking · environmentally sound propellant Ideal for cleaning glass parts after fusing.
£39.98 ex VAT
£47.98 inc VAT
-494x340.webp)
Camlok 92 Series Vertical Plate Clamp
92 Series
Camlok Vertical Plate Clamps (92 series). Primarily used for transporting sheet metal and steel plates in the vertical position - The 92 series is manufactured in the UK offering a top quality / performing clamp - spare parts are ready off the shelf.
£188.88 ex VAT
£169.98 ex VAT
£203.98 inc VAT
-494x340.webp)
Camlok CH Industrial standard Horizontal Plate Clamps
CH
The Camlok CH Industry standard Horizontal Plate clamps have been specifically designed to be used in pairs for lifting and transporting either single or bundles of steel plates as long as the minimum thickness is 5mm. The CH range are manufactured in the UK offering a top quality / performing clamp - Spare parts are ready off the shelf.
£257.32 ex VAT
£224.98 ex VAT
£269.98 inc VAT
Camlok CLB Side Container Lifting Lugs
CLB
The Camlok CLB Container Lifting Lugs, these container lugs are sold in sets of four and are our most popular range of lugs for lifting containers using the side lifting pockets on all standard containers.
£626.21 ex VAT
£548.98 ex VAT
£658.78 inc VAT
-494x340.webp)
SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS
Sign up here to get the latest news, updates and special offers delivered to your inbox.
