Get in touch01384 986 026

We Accept:

50 tonne Modular Spreader Beam

Estimated lead time:2 to 3 days. Please call if required urgently

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

50 tonne Modular Spreader Beam

Brand:

Description

50-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£1,788.98 ex VAT

£2,146.78 inc VAT

Lifting Slings available on request

Related products

24 tonne Modular Spreader Beam

BT T24

24-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£1,272.98 ex VAT

£1,527.58 inc VAT

34 tonne Modular Spreader Beam

BT T34

34-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£1,532.98 ex VAT

£1,839.58 inc VAT

70 tonne Modular Spreader Beam

BT T70

70-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£2,198.98 ex VAT

£2,638.78 inc VAT

50-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam. This style of lightweight lifting beams has become very popular over the last few years due to their flexibility in instantly changing the length of the lifting beam quickly by adding an extra strut to create the desired length. Manufactured from tubular steel with flanged boltable sections to create an incredibly strong, yet lightweight system. The Modular End Struts with link plates are supplied to create top and bottom lifting eyes that suit standard lifting shackles (shackles not supplied). 


T50 Modular Spreader Beam kit will be supplied with the following items. Complete with everything required, and once assembled can be used immediately.

Two Strut Ends c/w link plates. (500mm each (1000mm long per pair))

Middle Strut Sections (available in lengths of  500mm, 1000mm, 2000mm and 4000mm). enough sections will be supplied to make up span of the lifting beam required. 

Fixing Bolts M20 x 65 GRADE 8.8 HT Bolts, Nuts, and Washers. (The recommended tightening Torque is 160Nm).


If shackles are required with the T50, 50,000Kgs Modular Spreader Beam - Please use 35 Ton Alloy Safety Bow Shackles for Top Lifting Point and 25 Ton Alloy Safety Bow Shackles for the lower lifting points. Ultimate lifting Solutions advise that customers consider using Green Pin G4163 Bow Shackle with Safety Bolt manufactured to EN13889.


The 50 tonne lightweight modular spreader beam can have a minimum lifting span of just 1m (1,000mm), by adding different-sized middle struts the span is interchangeable in 500mm increments up to a maximum length of 13m span. If a longer lifting span is required, a larger capacity modular lifting beam will be required. If unsure, please call Ultimate Lifting Solutions and our specialist lifting division will be able to assist with your lifting application. Please note - As this Lifting attachment is a lifting spreader beam, It must only be loaded via the two endpoints through the link plates. NEVER HANG LOADS FROM THE MIDDLE STRUTS.


T50 - 50 tonnes (50,000Kgs) Traditional Modular Spreader Beam selection chart and basic information.

Span
SWL @ 45° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 30° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 20° Degrees Top lifting angle
Minimum top Lifting sling Length
1000 mm50 tonne (50,000Kgs)
500 mm50 tonne (50,000Kgs)
800 mm50 tonne (50,000Kgs)
1200 mm
1500 mm50 tonne (50,000Kgs)
900 mm50 tonne (50,000Kgs)
1300 mm50 tonne (50,000Kgs)
1900 mm
2000 mm50 tonne (50,000Kgs)
1200 mm50 tonne (50,000Kgs)
1800 mm50 tonne (50,000Kgs)
2600 mm
2500 mm50 tonne (50,000Kgs)
1600 mm50 tonne (50,000Kgs)
2300 mm50 tonne (50,000Kgs)
3400 mm
3000 mm50 tonne (50,000Kgs)
1900 mm50 tonne (50,000Kgs)
2800 mm50 tonne (50,000Kgs)
4100 mm
3500 mm50 tonne (50,000Kgs)
2300 mm50 tonne (50,000Kgs)
3300 mm50 tonne (50,000Kgs)
4800 mm
4000 mm50 tonne (50,000Kgs)
2600 mm50 tonne (50,000Kgs)
3800 mm50 tonne (50,000Kgs)
5600 mm
4500 mm50 tonne (50,000Kgs)
3000 mm50 tonne (50,000Kgs)
4300 mm50 tonne (50,000Kgs)
6300 mm
5000 mm50 tonne (50,000Kgs)
3300 mm50 tonne (50,000Kgs)
4800 mm50 tonne (50,000Kgs)
7000 mm
5500 mm50 tonne (50,000Kgs)
3700 mm50 tonne (50,000Kgs)
5300 mm50 tonne (50,000Kgs)
7700 mm
6000 mm50 tonne (50,000Kgs)
4000 mm50 tonne (50,000Kgs)
5800 mm50 tonne (50,000Kgs)
8500 mm
6500 mm46 tonne (18,000Kgs)
4400 mm50 tonne (50,000Kgs)
6300 mm50 tonne (50,000Kgs)
9200 mm
7000 mm40 tonne (16,000Kgs)
4700 mm50 tonne (50,000Kgs)
6800 mm50 tonne (50,000Kgs)
99000 mm
7500 mm36 tonne (36,000Kgs)
5100 mm50 tonne (50,000Kgs)
7300 mm50 tonne (50,000Kgs)
10700 mm
8000 mm32 tonne (32,000Kgs)
5500 mm50 tonne (50,000Kgs)
7800 mm50 tonne (50,000Kgs)
11400 mm
8500 mm28 tonne (28,000Kgs)
5800 mm50 tonne (50,000Kgs)
8300 mm50 tonne (50,000Kgs)
12100 mm
9000 mm25 tonne (25,000Kgs)
6200 mm44 tonne (44,000Kgs)
8800 mm50 tonne (50,000Kgs)
12900 mm
9500 mm22 tonne (22,000Kgs)
6500 mm39 tonne (39,000Kgs)
9300 mm50 tonne (50,000Kgs)
13600 mm
10000 mm20 tonne (20,000Kgs)
6900 mm35 tonne (35,000Kgs)
9800 mm50 tonne (50,000Kgs)
14300 mm
Span
SWL @ 45° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 30° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 20° Degrees Top lifting angle
Minimum top Lifting sling Length
10.5 metre
18 tonne (18,000Kgs)
7200 mm31 tonne (31,000Kgs)
10300 mm50 tonne (50,000Kgs)
15100 mm
11 metre
16 tonne (16,000Kgs)
7600 mm28 tonne (28,000Kgs)
10800 mm45 tonne (45,000Kgs)
15800 mm
11.5 metre
14 tonne (14,000Kgs)
7900 mm25 tonne (25,000Kgs)
11300 mm40 tonne (40,000Kgs)
16500 mm
12 metre
12 tonne (12,000Kgs)
8300 mm22 tonne (22,000Kgs)11800 mm36 tonne (36,000Kgs)
17300 mm
12.5 metre
11 tonne  (11,000Kgs)
8600 mm20 tonne (20,000Kgs)
12300 mm32 tonne (32,000Kgs)
18000 mm
13 metre10 tonne  (10,000Kgs)
9000 mm18 tonne (18,000Kgs)
12800 mm29 tonne (29,000Kgs)
18700 mm

Why purchase a 50 tonne T50 Britlift Traditional Modular Spreader Beam? These UK-manufactured quality modular lifting beams are amongst the lightest on the market and can be supplied with interchangeable components to create a specific length of lifting beam to suit most lifting applications. Being manufactured with small middle struts, when not in use a modular spreader beam can be dismantled for easy storage and transportation to the site. Modular Spreader Beams offer Versatility, due to the modular design of this style of lifting beam it can be re-assembled and reconfigured to suit multiple lift schedules and requirements. Modular Spreader Beams are cost-effective, as only a small number of struts are required to be able to assemble a variety of spans.


Technical considerations before purchasing a modular spreader beam.

A SPREADER BEAM MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS


STV (SLING TO VERTICAL) ANGLE MUST BE NO MORE THAN 45°.

THE ABOVE CHART MUST BE REFERRED TO IN ORDER TO ENSURE THAT THIS BEAM IS SUITABLE FOR THE PLANNED LIFT.

END LINKS MUST HANG DOWNWARDS, TOWARDS THE LOAD.

THE WLL (WORKING LOAD LIMIT) OF A SINGLE LINK PLATE IS 25 TONNES (50 TONNES COMBINED). DO NOT EXCEED THIS WEIGHT AT ONE END OF THE BEAM.

THE T4 MOD LIFT BEAM USES M20 x 65 GRADE 8.8 HT BOLTS, NUTS, AND WASHERS. THE RECOMMENDED TIGHTENING TORQUE IS 160Nm.

ANY PERSONNEL USING THIS PRODUCT MUST BE A TRAINED AND COMPETENT RIGGER OR SLINGER/SIGNALLER.

THE ONGOING USE OF THIS PRODUCT MUST BE IN ACCORDANCE WITH THE REQUIREMENTS IN LOLER (LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998).

PLEASE ENSURE THAT NO MORE THAN 6 STRUTS ARE USED IN THE ASSEMBLY OF A BEAM.

CHECK THAT NO RIGGING EQUIPMENT CLASHES WITH THE BEAM. THE BEAM MUST ONLY BE LOADED THROUGH THE SHACKLE PIN HOLES AT EACH END.

T50 - 50 tonne (50,000Kgs) Traditional Modular Spreader beam selection chart and basic information.


Capacity - 50 tonne.

Length available 1.0m to 13.0m.

One of the Lightest beams on the market.

Supplied without shackles or lifting slings.

designed and manufactured in the UK.

Cost-effective.

supplied fully certified.


T50 - 50 tonnes (50,000Kgs) Traditional Modular Spreader Beam selection chart and basic information.

Span
SWL @ 45° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 30° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 20° Degrees Top lifting angle
Minimum top Lifting sling Length
1000 mm50 tonne (50,000Kgs)
500 mm50 tonne (50,000Kgs)
800 mm50 tonne (50,000Kgs)
1200 mm
1500 mm50 tonne (50,000Kgs)
900 mm50 tonne (50,000Kgs)
1300 mm50 tonne (50,000Kgs)
1900 mm
2000 mm50 tonne (50,000Kgs)
1200 mm50 tonne (50,000Kgs)
1800 mm50 tonne (50,000Kgs)
2600 mm
2500 mm50 tonne (50,000Kgs)
1600 mm50 tonne (50,000Kgs)
2300 mm50 tonne (50,000Kgs)
3400 mm
3000 mm50 tonne (50,000Kgs)
1900 mm50 tonne (50,000Kgs)
2800 mm50 tonne (50,000Kgs)
4100 mm
3500 mm50 tonne (50,000Kgs)
2300 mm50 tonne (50,000Kgs)
3300 mm50 tonne (50,000Kgs)
4800 mm
4000 mm50 tonne (50,000Kgs)
2600 mm50 tonne (50,000Kgs)
3800 mm50 tonne (50,000Kgs)
5600 mm
4500 mm50 tonne (50,000Kgs)
3000 mm50 tonne (50,000Kgs)
4300 mm50 tonne (50,000Kgs)
6300 mm
5000 mm50 tonne (50,000Kgs)
3300 mm50 tonne (50,000Kgs)
4800 mm50 tonne (50,000Kgs)
7000 mm
5500 mm50 tonne (50,000Kgs)
3700 mm50 tonne (50,000Kgs)
5300 mm50 tonne (50,000Kgs)
7700 mm
6000 mm50 tonne (50,000Kgs)
4000 mm50 tonne (50,000Kgs)
5800 mm50 tonne (50,000Kgs)
8500 mm
6500 mm46 tonne (18,000Kgs)
4400 mm50 tonne (50,000Kgs)
6300 mm50 tonne (50,000Kgs)
9200 mm
7000 mm40 tonne (16,000Kgs)
4700 mm50 tonne (50,000Kgs)
6800 mm50 tonne (50,000Kgs)
99000 mm
7500 mm36 tonne (36,000Kgs)
5100 mm50 tonne (50,000Kgs)
7300 mm50 tonne (50,000Kgs)
10700 mm
8000 mm32 tonne (32,000Kgs)
5500 mm50 tonne (50,000Kgs)
7800 mm50 tonne (50,000Kgs)
11400 mm
8500 mm28 tonne (28,000Kgs)
5800 mm50 tonne (50,000Kgs)
8300 mm50 tonne (50,000Kgs)
12100 mm
9000 mm25 tonne (25,000Kgs)
6200 mm44 tonne (44,000Kgs)
8800 mm50 tonne (50,000Kgs)
12900 mm
9500 mm22 tonne (22,000Kgs)
6500 mm39 tonne (39,000Kgs)
9300 mm50 tonne (50,000Kgs)
13600 mm
10000 mm20 tonne (20,000Kgs)
6900 mm35 tonne (35,000Kgs)
9800 mm50 tonne (50,000Kgs)
14300 mm
Span
SWL @ 45° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 30° Degrees Top lifting angle
Minimum top Lifting sling Length
SWL @ 20° Degrees Top lifting angle
Minimum top Lifting sling Length
10.5 metre
18 tonne (18,000Kgs)
7200 mm31 tonne (31,000Kgs)
10300 mm50 tonne (50,000Kgs)
15100 mm
11 metre
16 tonne (16,000Kgs)
7600 mm28 tonne (28,000Kgs)
10800 mm45 tonne (45,000Kgs)
15800 mm
11.5 metre
14 tonne (14,000Kgs)
7900 mm25 tonne (25,000Kgs)
11300 mm40 tonne (40,000Kgs)
16500 mm
12 metre
12 tonne (12,000Kgs)
8300 mm22 tonne (22,000Kgs)11800 mm36 tonne (36,000Kgs)
17300 mm
12.5 metre
11 tonne  (11,000Kgs)
8600 mm20 tonne (20,000Kgs)
12300 mm32 tonne (32,000Kgs)
18000 mm
13 metre10 tonne  (10,000Kgs)
9000 mm18 tonne (18,000Kgs)
12800 mm29 tonne (29,000Kgs)
18700 mm

Why purchase a 50 tonne T50 Britlift Traditional Modular Spreader Beam? These UK-manufactured quality modular lifting beams are amongst the lightest on the market and can be supplied with interchangeable components to create a specific length of lifting beam to suit most lifting applications. Being manufactured with small middle struts, when not in use a modular spreader beam can be dismantled for easy storage and transportation to the site. Modular Spreader Beams offer Versatility, due to the modular design of this style of lifting beam it can be re-assembled and reconfigured to suit multiple lift schedules and requirements. Modular Spreader Beams are cost-effective, as only a small number of struts are required to be able to assemble a variety of spans.


Technical considerations before purchasing a modular spreader beam.

A SPREADER BEAM MUST ONLY BE LOADED AT THE TWO END POINTS THROUGH THE END LINKS. NEVER HANG LOADS FROM THE STRUTS


STV (SLING TO VERTICAL) ANGLE MUST BE NO MORE THAN 45°.

THE ABOVE CHART MUST BE REFERRED TO IN ORDER TO ENSURE THAT THIS BEAM IS SUITABLE FOR THE PLANNED LIFT.

END LINKS MUST HANG DOWNWARDS, TOWARDS THE LOAD.

THE WLL (WORKING LOAD LIMIT) OF A SINGLE LINK PLATE IS 25 TONNES (50 TONNES COMBINED). DO NOT EXCEED THIS WEIGHT AT ONE END OF THE BEAM.

THE T4 MOD LIFT BEAM USES M20 x 65 GRADE 8.8 HT BOLTS, NUTS, AND WASHERS. THE RECOMMENDED TIGHTENING TORQUE IS 160Nm.

ANY PERSONNEL USING THIS PRODUCT MUST BE A TRAINED AND COMPETENT RIGGER OR SLINGER/SIGNALLER.

THE ONGOING USE OF THIS PRODUCT MUST BE IN ACCORDANCE WITH THE REQUIREMENTS IN LOLER (LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998).

PLEASE ENSURE THAT NO MORE THAN 6 STRUTS ARE USED IN THE ASSEMBLY OF A BEAM.

CHECK THAT NO RIGGING EQUIPMENT CLASHES WITH THE BEAM. THE BEAM MUST ONLY BE LOADED THROUGH THE SHACKLE PIN HOLES AT EACH END.


Write a review

More products from category:

Lifting & Spreader Beams

4 tonne Modular Spreader Beam

BT T4

4-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£598.98 ex VAT

£718.78 inc VAT

8 tonne Modular Spreader Beam

BT T8

8-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£674.98 ex VAT

£809.98 inc VAT

13 tonne Modular Spreader Beam

BT T13

13-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£752.98 ex VAT

£903.58 inc VAT

24 tonne Modular Spreader Beam

BT T24

24-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£1,272.98 ex VAT

£1,527.58 inc VAT

34 tonne Modular Spreader Beam

BT T34

34-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£1,532.98 ex VAT

£1,839.58 inc VAT

50 tonne Modular Spreader Beam

BT T50

50-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£1,788.98 ex VAT

£2,146.78 inc VAT

70 tonne Modular Spreader Beam

BT T70

70-tonne Modular Spreader Beams are an interchangeable, lightweight, and versatile style of Lifting beam and a cost-effective alternative to a fixed-span lifting beam.

£2,198.98 ex VAT

£2,638.78 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up