Get in touch01384 986 026

We Accept:

Probst Adjustable Block Paver Cart VTK-V

Key notes for ordering:

New Stock available. order by Noon for Same day dispatch

Estimated lead time:1 - 2 Days Max

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

Probst Adjustable Block Paver Cart VTK-V

Brand:

Capacity

400 Kgs

Description

Probst Adjustable Paver Transport Cart VTK-V will grip and transport multiple layers of paving blocks, bricks, kerbstones, or slabs from the ground or from a pallet without the need for a ramp to the working (laying) area effortlessly and efficiently. Cuts out the old-fashioned way of filling up a wheelbarrow to transport those pavers.

save£118.82

£999.00 ex VAT

£899.98 ex VAT

£1,079.98 inc VAT

Access ramp and rear supporting wheel available

Related products

Brick & Block Barrow BB 1104

BB 1104

The BB1104 Brick, Block and Paver barrow has been designed to increase efficiency around the modern-day construction site by allowing multiple amounts of bricks, blocks kerbstones, and even small or large slabs and pavers to be transported at the same time

£798.98 ex VAT

£958.78 inc VAT

Probst Adjustable Block Paver Cart VTK-V will grip, lift and transport multiple layers of bricks, paver blocks, kerbstones, or slabs from the floor or pallet to the working area effortlessly. Gone are the days of old, when landscapers and block pavers had to load a wheelbarrow up of bricks and slabs before moving them to the laying area, this wheeled cart will lift a full layer of bricks within seconds, grip them securely, and then safely unload them where needed.

This quality German-manufactured block paver cart by Probst with its durable galvanized finish has been designed to make every landscaper and block paving team's working day easier, as a full stack of block paving blocks, kerbstones, and slabs can be easily loaded from the delivered pallet pack without the need of a ramp and transported to the working area. The paver transport Cart VTK-V can be adjusted from 550mm to 1050mm Max to suit the blocks or slabs to be lifted, and the gripping width can be altered without the need for extra tools.  

The Paver transporter cart is compact and narrow in design (only 1150mm wide) making it perfect for tight pathways or smaller building sites and the long handles give a favorable load distribution position that ensures optimal operation and ease on the back and body of the operator. Once the Probst Block cart is loaded up, blocks can easily be transported from the pallet to near the working area.

ModelProbst Part NoWorking Load LimitClamping RangeLength of GrippersMax Height of Brick/Stone Weight
Adjustable Paver Cart VTK-V51100015400 Kgs550 - 1050 mm200mm900 mm68 Kgs

The Probst Access Ramp is also available on request for the Probst VTK-V Blockcart (makes picking up interlocking paving stones on a pallet easier)

The Probst Rear Supporting Wheel is available, (great for added balance/assistance on level ground).


Adjustable Paver Transport Cart VTK-V - Part Number 51100015 - Also known as the Probst VTK-V Blockcart or Probst VTK-V Adjustable Block Pallet Cart, Probst Adjustable Block Paver Cart VTK-V

Clamping is done by operating a lever 90° (maximum pressure 15 kg).

Adjustable gripping width from 550 mm – 1,050 mm.

The minimum and maximum gripping widths can be altered using special grippers.


How To operate the Probst Adjustable Paver Transport Cart VTK-V from bricks already on the floor

Position the cart carefully next to the line of bricks to be lifted.

1. Move the VTK-V carefully to the load.

2. Bring the stop and the bottom plate in position by placing the VTK-V in the upright position.

3. Engage the lever up to the stop clockwise, so the load is getting clamped.

4. Take the VTK-V by the handles, bring it in a horizontal position and carefully transport the load to the place of destination.

5. At the place of destination, bring the VTK-V carefully to the upright position.

6. Rotate the lever counter-clockwise to release the load.

7. The VTK-V can now be moved away.


How To operate the Probst Adjustable Paver Transport Cart VTK-V from bricks from a pallet

1. Use the support roll to place the VTK-V on the pallet. Move the VTK-V carefully to the load.

2. Bring the stop and the bottom plate in position by placing the VTK-V in the upright position.

3. Engage the lever up to the stop clockwise, so the load is getting clamped. 

4. Tilt the VTK-V towards yourself and pull it so the support roll is on the edge of the pallet. The wheels have to extend over the edge of the pallet.

5. Tilt the VTK-V further on until it stands on its wheels

6. At the place of destination, bring the VTK-V carefully to the upright position. Rotate the lever counter clockwise to release the load.

7. The VTK-V can now be moved away.

Further information on the Probst Adjustable Paver Transport Cart - Designed for the effortless transportation of bound or loose pavers, kerb stones, slabs, etc.

Probst Part Number 51100015


Key Features

An integral protection device prevents the overloading of the clamping mechanism.

A favourable load distribution and the light-weight-nature of the device ensure optimal operating.

Narrow /Slim design (1150mm) means it can be used on pathways and on the smallest building sites.

Blocks, stones and slabs can easily be loaded from the pallet without the need for a ramp.

Fully mechanical operation.

Probst VTK-V Blockcart can be adjusted smoothly and without the need for extra tools.

Durable galvanized surfaces to protect against the elements.


Clamping is done by operating a lever at 90° (maximum pressure required 15 kg).

Adjustable gripping width from 550mm – 1,050mm.

The minimum and maximum gripping widths can be altered using special grippers.

ModelProbst Part NoWorking Load LimitClamping RangeLength of GrippersMax Height of Brick/Stone Weight
Adjustable Paver Cart VTK-V51100015400 Kgs550 - 1050 mm200mm900 mm68 Kgs

Access Ramp is also available on request (makes picking up interlocking paving stones on a pallet easier) - Rear supporting wheel available, (great for added balance/assistance on level ground).


Adjustable Paver Transport Cart VTK-V. For the effortless transportation of bound or loose pavers, kerb stones, slabs, etc

Maintenance of the Probst Paver Transport Cart

To ensure the correct function, safety, and service life of the device the following points must be executed with in the maintenance interval.

Advisable notes - Only original spare parts, otherwise the warranty expires.


Initial inspection after 25 operating hours

Check or retighten all fixing screws (may only be carried out by a qualified person).

Inspection Every 50 operating hours

Retighten all fixing screws (make sure that the screws are retightened according to the valid tightening torques of the corresponding strength classes).

Check all existing safety elements (such as folding pins) for proper function and replace defective safety elements. → 1)

Check all joints, guides, pins and sprockets, and chains for proper function, readjust or replace if necessary.

Check gripper jaws (if present) for wear and clean, replace them if necessary.

All existing sliding guides, rack gears, and joints of moving parts or machine components must be greased/lubricated to reduce wear and for optimum movement sequences (recommended grease: Mobil Grease HXP 462).

Lubricate all grease nipples (if present) with a grease gun.

Inspection after a max 12 months - (shorten the inspection interval in case of harsh operating conditions)

Inspection of all suspension parts, as well as bolts and brackets.

Inspection for cracks, wear, corrosion, and functional safety by an expert.

Write a review

More products from category:

Workplace Equipment

Armorgard Oxbox OX5 Van Box

Oxbox OX05 Van box

A Simple yet dependable solution for securing tools & equipment in this medium duty van storage box. The Oxbox OX05 van storage box has been designed as a no frills van storage box that offers a cost effective alternative to the higher priced tool boxes from Armorgard, but there has been no compromise on quality.

£184.39 ex VAT

£221.27 inc VAT

Concrete Manhole Lifting Pin

MLP1.5T

Concrete Manhole Pins are usually used in sets of three to lift concrete manhole chambers. This style of concrete lifting Pins are supplied with Large flat washer and retaining pins - Other style of pins available on request

£49.98 ex VAT

£59.98 inc VAT

DM200i Scaffold Hoist - 200Kgs

DM200i

The DM200i is a 200Kgs rated Quality Scaffold Hoist that comes with swivelling bracket for direct fit to scaffold tubes, a Lifting height of up to 25m, and a fast lifting speed of 25 metres per minute. Industrial quality hoists aimed at professional builders

£954.99 ex VAT

£764.98 ex VAT

£917.98 inc VAT

Pedestrian Salt Spreader

PPS

Pedestrian Push Along Salt Spreader. Ideal for those winter nights of frost. Our salt spreader will ensure pathways, walkways and access ways are well gritted . Fitted with large pneumatic tyres to make movement easier and a large 50kg capacity hopper that is non corrosive.

£189.98 ex VAT

£227.98 inc VAT

Probst TELEPLAN TP Hand Screeding System

Probst Teleplan TP

The Probst TELEPLAN TP Hand Screeding System is classed as an adjustable Two Person Hand Screeding system, ideal for screeding different working widths up to 3.5m wide (11 feet). Perfect for creating perfect consistent levels over the full continuous length being worked. A great addition to any Landscapers/Block Pavers helpful tools.

£259.00 ex VAT

£239.98 ex VAT

£287.98 inc VAT

Probst Telescopic Screeding System TAS-UNI

Probst TAS-UNI

The Probst Telescopic Screeding System TAS-UNI can be classed as the universal "all-rounder" screeding system for both large and small construction sites. perfect for screeding long wide areas quickly. The Probst TAS-UNI is designed with a bigger profile which helps move and screed larger and more rough screeding materials.

£2,074.98 ex VAT

£2,489.98 inc VAT

100 Litre Grit and Salt Bin

GB100Y

ULS GB100Y Grit Bin. Small & compact its 3.5cubic feet / 100 Litre capacity grit and salt bin, ideal for both commercial and residential use. This slimline mini grit bin perfect for outside an office block entrance or company reception

£299.99 ex VAT

£359.99 inc VAT

120 litre Forced Action Mixer IMER

MIX 120 PLUS

Quality European-built IMER MIX 120 Plus Forced Action Mixer is ideal for mixing a broad range of both dry and wet materials up to 8mm in diameter, such as plaster, mortar, screed, concrete, and resin

£2,657.00 ex VAT

£2,324.98 ex VAT

£2,789.98 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up