Probst TELEPLAN TP Hand Screeding System

The Probst Teleplan TP Hand Screeding System is the latest addition to the ever-popular Probst range of screeding tools and equipment. These screeding bars come standard with height-adjustable brackets on both the left and right ends, making them perfect for working off kerbstones or similar surfaces. This feature allows for a consistent height along the full length of the screeded area. Additionally, the system is fitted with a built-in level indicator (bubble level), ensuring that the screed bar remains perfectly flat during use.

The Probst Teleplan system is available in four adjustable sizes: 600mm to 1000mm, 1000mm to 1650mm, 1500mm to 2600mm, and 2000mm to 3500mm.

Options for the Probst Teleplan system include pulling handles, adjustable rollers, and multi-positional handle clamps—see below for specifications.

NOTE: The system is supplied without handles to create a traditional screeding board. A pair of handles can be purchased separately as an accessory. The advantage of acquiring the optional handles (HG-ERGO-DUO - Part Number 41010072) is that they allow both operators to stand upright in a more relaxed and ergonomic position, eliminating the need to kneel in wet sand while dragging the board.

The Probst TELE PLAN TP Series of screeding bars can be used as traditional screeding boards, or you can add pulling handles (not included) to create a stand-up, two-person screeding system that eliminates the need to kneel in damp sand. This versatile system can be used with both screeding rails and off kerbs.

Designed with an aluminium, sickle-shaped screeding head, the TP Screeding system cuts down into the bedding material when in use, rather than moving upwards—similar to using a flat-bottomed screed board or wooden plank. As a result, the top layer that has been "scraped off" will be left with a smooth, profiled surface, ready for laying block paving or slabs.

Additionally, the curved profile of the Probst TP Handscreeding System allows it to glide easily into the screed, eliminating the need to force the head down while pulling. This makes it ideal for small to medium-sized bedding areas where compacted sand is used.

Available in four widths that are all adjustable - Probst TP60/100, TP100/165, TP150/260, TP200/350.

TP60/100 (Part Number 51010006) Adjustable from 600m to 1000mm. Ideal as a one-man screeding board.

TP100/165 (Part Number 51010001) Adjustable from 1000m to 1650mm. Ideal as a one-man screeding board.

TP150/260 (Part Number 51010002) Adjustable from 1500m to 2600mm. Ideal as a two-man screeding board. Add 2 man handles for screeding across larger areas.

TP200/350 (Part Number 51010003) Adjustable from 2000m to 3500mm. Ideal as a one-man screeding board. Add 2 man handles for screeding across larger areas.

The Aluminium sickle-shaped profile itself offers a non-flexing screed levelling tool complete with an integrated level indicator, due to its strong design and even at the max width of 3.5m you will see no flex. The Teleplan Handscreeding systems can be connected together to create the desired width, thus one and the same tool can be used for various working widths.

Accessories for the TELEPLAN Hand Screeding Systems

HG-ERGO-DUO

Probst Part Number: 41010072

Handles to Suit Teleplan and Fixplan

(Replaces the older version HG-TP: Probst Part Number 51010005 - Set of 2 Pulling Handles)

These optional handles can be fitted to each end of the screeding profile. The screeding system can now be used while standing, allowing for a more relaxed and ergonomically correct body position. This design prevents operators from kneeling in damp sand. The new design of the HG-ERGO-DUO has been enhanced to offer greater ergonomic benefits. A set of two handles is supplied to enable fatigue-free working in a standing position, and they can be attached to the side parts at any time via a plug-in fastener.

HGH-TP

Probst Part Number: 51010008

Multi-Positional Handle Clamps

The handle fasteners can be easily fixed in any position along the profile, even at overlapping sections, to secure the two HG-TP handles in place. This feature enables just one person to screed larger working widths in an upright position quickly and effortlessly.

TP/FP-RS

Set of Roller Units for TELEPLAN

Probst Part Number: 41010080

The Teleplan Roller Set is compatible with all Teleplan models and facilitates the smooth running of the screeding board when used off a kerb, against walls, or alongside raised borders. The roller sets are height-adjustable, ensuring a consistent and accurate level.

Optional Extra for the TELEPLAN Handscreeding Systems

Probst AZL Screeding Rail Kits

(Available in two lengths: 13m kit and 25m kit)

This lightweight set of screeding side rails is designed to be used in conjunction with the Probst EP-UNI Hand Block Paving Screeding System. The screeding blade system slides effortlessly along the rails, aiding in the setting of a consistent and accurate level and width for all screeding materials, resulting in a perfectly level finish for concrete blocks or slabs. These screeding poles are simple to use, featuring a plug-in connection for fast and easy assembly. The kit consists of various lengths of non-corroding, galvanised screeding rails.

Two different-sized sets are available

AZL-EP SET-13 - Probst Part Number 5100089 - Screeding Rail Kit x 13m total length (Kit comprises 2 x 1.5m, 4 x 2.5m = Total of 13m)

AZL-EP SET-25- Probst Part Number 5100057 - Screeding Rail Kit x 25m total length (Kit comprises 2 x 1.5m, 4 x 2.5m, 4 x 3m Rails = Total of 25m)

Why Use the Probst Aluminium Hand Screeding System?

The Probst two-person aluminium hand screeding system features a sickle-shaped profile head that effortlessly cuts into the screeding material, creating a professional and consistently flat surface quickly. By adding handles, the task becomes even easier, allowing users to operate the kit while standing upright instead of kneeling in the sand.

Why Use a Screeding Rail Kit with the Screeding Handle Set?

When the AZL-EP Screeding Rail Kit is used in conjunction with the Probst Teleplan TP Screeding Kit, it facilitates smoother gliding of the sickle-shaped aluminium screeding board over the rails. This combination reduces physical exertion for the screeding contractor, resulting in a consistently flat level that is ready for laying blocks or slabs.

Why Use the Teleplan TP Screeding System for Kerbstones?

The Probst TP Screeding System comes standard with height-adjustable arms on both the left and right corners, helping to create a perfect and consistently flat screeded area. This feature makes the laying of paving blocks and slabs easier and faster, ensuring a professional finish.