Probst SAFEFLEX SF (Paver/Brick) Clamp

The Probst Safeflex SF is an innovative clamping device to safely secure bricks, pavers and slabs before cutting. This paver clamp makes cutting with angle grinder easier, safer and gives a more precise cut. Safely cut clean edges when using an angle grinder with the Probst SafeFlex SF Stone Clamp. This simple to use tool will clamp the paver securely in place quickly and safely by the two clamping brackets, supported by the operators foot which reduces the risk of cuts and injury considerably. Due to the brick or block being held securely via the non slip mat which prevents  sideways movement and allows the cutting of very slim pieces.

The SAFEFLEX SF clamping fixture tool is ideal for builders and landscapers that need to use an angle grinder, Disc Cutter or "Stihl Saw" to cut paver blocks, bricks, slabs, flagstones or other builders material. 

Non slip mat, holds the stone in place without sideways slip.

Fast and Simple adjustment to the Stone /Brick thickness.

Suitable for both right and left handed use.

Elevates the material to be cut, no more cutting into the ground of slabs underneath.

Durable surface protection via galvanized finish.

How to use the Safeflex SF Clamp?

to secure the paver block or slab etc, firstly rest the block on the bottom shelf and then the operator will close the top clamp with his foot.  the non slip thread will hold the block in place. To release, the operator removes his foot and the built in springs will flip the top bracket up and the newly cut block and can removed.

Why use the Safeflex SF?

This paver clamp safely holds a paver or slab in place, off the ground, no rocking paver or sideways movement. The operators foot is in a safe position and safeguarded via the foot guard. No more balancing a brick or block on the end of the pallet or wall and clamping just under the foot. the Safeflex clamp acts as a vice to hold the block without it wobbling.