Get in touch01384 986 026

We Accept:

1,000Kgs SWL Free Standing Jib Crane c/w Manual Chain Hoist

Key notes for ordering:

Dispatched as a kit with instructions for building and maintenance. Contact us for installation prices and service price. Suppled with certification.

Estimated lead time:Manufactured to Order. Approx. 2 - 3 Weeks Delivery

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

1,000Kgs SWL Free Standing Jib Crane c/w Manual Chain Hoist

Brand:

Capacity

1,000Kgs
(1 tonne)

Description

1,000Kgs  SWL Free Standing Jib Crane c/w Manual Chain Hoist. Quality manufactured Freestanding Jib cranes supplied fully tested complete with suitable manual chain hoist, Arm length 2m - 6m. Pillar height 2m - 6m. Slewing angle 270°. supplied fully tested and certified.

£2,658.98 ex VAT

£3,190.78 inc VAT

Related products

1,000Kgs SWL Free Standing Jib Crane c/w Electric Hoist - Over Braced

FJC

1000Kgs SWL Free Standing Jib Crane c/w Electric Hoist - Over Braced version manufactured to order to customer's specification. various options available on Arm length 2m - 6m and column height 2m - 6m. Slew range 270°. 

£2,658.98 ex VAT

£3,190.78 inc VAT

1,000Kgs  SWL Free Standing Jib Crane c/w Manual Chain Hoist. Quality manufactured Freestanding Jib cranes supplied fully tested complete with suitable manual chain hoist, Arm length 2m - 6m. Pillar height 2m - 6m. Slewing angle 270°. Ultimate Lifting Solutions are pleased to offer our fully certified range of 1-tonne Capacity Freestanding Over-Braced Jib Cranes supplied with a Manual Chain Hoist as standard. All our floor-mounted Jib cranes are manufactured to order to suit your requirements, choose from the standard range below or contact us if you require a specific specification. Even though Jib Cranes are manufactured to order our delivery times are only a few weeks from design through the manufacturer to delivery which betters most of our competitors. We also have our installation team that can install both the Jib Crane and Hoist (if required) anywhere in the UK. 

We show the most common sizes here, feel free to call us or email if you require a bespoke Jib Crane or if you require a quote for installation.


Manufactured and supplied in a simple two-part kit form. The slewing arm which the hoist will move along, and the pillar that the swing arm fits to. Both the arm and pillar can be manufactured to any length between 2m and 6m and the arm is designed to slew through 270° giving a very wide working area. The arm has a trolley already fitted, making it even more simple for connecting to your hoist, spring balancer, or vacuum lifter.

We have made it simple for you - To save you time and stress, we have put a package together with both the Jib Crane and a quality Manual chain hoist - All you need to select is what height of lift you require on the manual hoist to suit your jib working height.

Dimensions for illustration only - Based on 1,000Kgs  SWL Free Standing Jib Crane c/w Manual Chain Hoist with 3m Overall height.
ModelSWLWorking Height to Underside of beamOverall Height of JibTrolley DepthArm Length (Radius of reach)Total Weight
FJC1,000R3
1,000Kgs
2,100mm (2.1m)
3,000mm (3m)
123mm
3,000mm (3m)
505Kgs
FJC1,000R4
1,000Kgs
2,000mm (2.0m)
3,000mm (3m)
123mm
4,000mm (4m)
535Kgs
FJC1,000R5
1,000Kgs
1,800mm (1.8m)
3,000mm (3m)
123mm
5,000mm (5m)
565Kgs
FJC1,000R6
1,000Kgs
1,700mm (1.7m)
3,000mm (3m)
123mm
6,000mm (6m)
640Kgs
Why Choose a 1,000Kgs  SWL Free Standing Jib Crane c/w Manual Chain Hoist?
There are many advantages to purchasing a free-standing Over Braced Jib Crane, they are extremely versatile within the factory, speeding uplifting, moving components off presses or workbenches, and loading or unloading lorries. Lifting heavy objects such as granite, timber or steel. Swing Jib cranes are made up of two main parts, the pillar c/w base plate, and arm, therefore a simple manual jib crane does not have many parts to maintain, making them extremely reliable, which in turn means they do not break down, so no loss in production time. 

Easy to install - These freestanding cranes simply just bolt to the floor, once you have checked your floor is suitable for a jib crane, and bought it, we arrange to manufacture the jib, and then when it is supplied to the site, the floor just needs to be drilled and the floor mounting plate secured -  We at Ultimate Lifting Solutions offer this service and can offer full installation by using our own highly trained engineers or just the commissioning/ load testing, we can offer a package to meet your requirements.

Because of the simple design, they are inexpensive to both buy and maintain compared to other cranes. Under normal working conditions, they will only need an industry standard 12 monthly servicing. We at Ultimate Lifting Solutions offer this service and can offer various maintenance/service packages to meet your requirements.

How does a Swing Jib Crane work?
A standard over-braced swing Jib as mentioned has two main parts - The Pillar and the Arm. The arm can rotate from left to right and vice versa the swing or slew angle is set at 270° as standard. On all our swing jibs up to 1,000Kgs, they will slew with ease without the requirements of powered assistance, hence keeping the costs down. The arm on our Jib cranes is supplied with a trolley, which moves up and down the full length of the arm, this trolley gives you the reach and flexibility to reach into corners of your factory with ease. 

What else is required for a 1,000Kgs  SWL Free Standing Jib Crane c/w Manual Chain Hoist? 
You now have your Swing Jib fitted. You now need a hoist, these fit easily to the trolley that was supplied free of charge with the freestanding jib crane.  You just need to decide what hoist you need. To keep the costs down a manual hoist is the cheapest option, but you will not save on production time, as they are slow and do need assistance by hand, and sometimes for larger items, you might not be able to reach them. The second option and best option is an Electric Hoist, these hoists enable you to easily lift and lower your components quickly, cutting down on production time, and it will soon pay for itself in time saved.

Installation
As mentioned above, the Jib Crane can be an easy installed and fixed directly to the floor via the supplied base plate. Once installed and the hoist fitted, all that is left is commissioning, testing, and signing off the Jib as safe to use. we are more than happy for all our customers to install themselves or find their installation team. We are also more than happy to offer our engineers to take away this task. We can install the Jib, install the Hoist, commission, and test and we will not leave the site until everything is working correctly and safely.  

1,000Kgs  SWL Free Standing Jib Crane c/w Manual Chain Hoist

All our manufactured Jibs are:

Duty classification:  A3 according to BS 733: 1990.

All jibs are lubrication free. The pivot bushes are acetal and therefore do not require lubrication. The trolleys running surfaces are also lubrication free.

Supplied with Base Plate for fixing directly to the floor.

Manual slewing and trolley travel operation.

Minimal maintenance requirement.

A clutch-controlled slewing mechanism can be tightened/loosened to control how freely the arm pivots.  

Bases are fully welded to the column – in most situations, this removes the need for an oversized load spreading plate or setting an anchor frame into concrete, therefore making installation much quicker and more cost-effective.   


Key Points of our UK-manufactured Jib Cranes

SWL - 1,000kg,

Pillar Height - 2m up to 6m 

Arm length - 2m up to 6m 

Slew Angle - a 270-degree manual slew

Hoist - Fitted with Yale Manual Chain Hoist

Trolley - Fitted with integrated push travel trolley for suspending above the hoist

Fast delivery - We aim to deliver all our Swing Jibs within 10 to 14 days


Optional extras

Adjustable slewing limits, To reduce the swing arc

Slewing lock, to fix the arm into a specific position

1,000Kgs  SWL Free Standing Jib Crane c/w Manual Chain Hoist as a rule does not need much service or maintenance. Yet, general observations of the overall condition of the jib and the hoist connected to it can be carried out by the operator - any faults should be reported immediately. More importantly to keep the swing Jib and manual hoist running at maximum efficiency and to keep within the UK laws regarding LOLER inspections set out by HSE, both the Jib and the hoist on it should have a maintenance service scheduled no later than 12 months. This service should be undertaken by qualified service engineers - If you would like to know more about the servicing and general maintenance, please feel free to contact us, we do have qualified engineers and are happy to quote for all your crane servicing requirements.

All our manufactured Jibs are

Duty classification:  A3 according to BS 733 : 1990 

All jibs are lubrication free.  The pivot bushes are acetal and therefore do not require lubrication.  The trolleys running surfaces are also lubrication free.

Manual slewing and trolley travel operation

Minimal maintenance requirement

Clutch controlled slewing mechanism, can be tightened/loosened to control how freely the arm pivots.  

Bases are fully welded to the column – in most situations this removes the need for an oversized load spreading plate or setting an anchor frame into concrete, and therefore making installation much quicker and more cost effective.   


Key Points of our UK manufactured Jib Cranes

SWL - 1,000kg,

Pillar Height - 2m up to 6m 

Arm length - 2m up to 6m 

Slew Angle - 270-degree manual slew

Hoist - Fitted with Yale Manual Chain Hoist

Trolley - Fitted with integrated push travel trolley for suspending above hoist

Fast delivery - We aim to delivery all our Swing Jibs within 10 to 14 days


Optional extras

Adjustable slewing limits, To reduce the swing arc

Slewing lock, to fix the arm in to a specific position


Jib Cranes as a rule do not need much service or maintenance. Yet, general observations of the overall condition of the jib and the hoist connected to it can be carried out by the operator - any faults should be reported immediately


More importantly to keep the Jib and hoists running at maximum efficiency and to keep within the UK laws with regarding LOLER inspections set out by HSE, both the Jib and the hoist on it should have a maintenance service scheduled no later than 12 months. This service should be undertaken by qualified service engineers - If you would like to know more about the servicing and general maintenance, please feel free to contact us, we do have qualified engineers and are happy to quote for all your crane servicing requirements.

Write a review

More products from category:

Lifting Equipment

Crosby Straightpoint RLP Radiolink Plus c/w Wireless Handheld Display

RLP

The Crosby Straightpoint Radiolink Plus is a Wireless Tension Load Cell c/w Handheld display capable of weighing and dynamic load monitoring from 1t up to 500t. All sizes are DNV-GL approved. The versatile RLP is supplied with the updated rate of 3Hz and can be easily configured to run at industry-leading speeds of up to 200Hz - ideal for dynamic forces measurement.
DM200i Scaffold Hoist - 200Kgs

DM200i

The DM200i is a 200Kgs rated Quality Scaffold Hoist that comes with swivelling bracket for direct fit to scaffold tubes, a Lifting height of up to 25m, and a fast lifting speed of 25 metres per minute. Industrial quality hoists aimed at professional builders

£954.99 ex VAT

£764.98 ex VAT

£917.98 inc VAT

DSR S Pfaff Wire Rope Sheaves

DSR-S

The DSR S Wire Rope Sheaves are available in a wide variety of pulley diameters, manufactured from high quality wear resistant steel. Supplied with bearings.

£75.60 ex VAT

£90.72 inc VAT

DSRB Pfaff Wire Rope Sheave Blocks

DSRB

Pfaff DSRB Wire Rope sheave blocks are suitable for both manual and electric driven wire rope winches. These dynamic all rounders with variable rope and sheave diameters and cable deflection op up to 180° can move loads of up to 8 tonne with ease and reliability.

£98.98 ex VAT

£118.78 inc VAT

Geosynthetic Liner Lifting Beam

ISB

Our Geosynthetic Liner Lifting beam system comes complete with everything you need to lift liner rolls, can also be used for any type of pond lining and even carpet. In these lifting kits is the Beam itself, two leg top lifting chains, the dropper chains, and the spindle to slide your liner over. For everything you need, just add the liner roll.

£2,989.98 ex VAT

£3,587.98 inc VAT

HTG - Yale Gear Travel Trolley (Type A)

HTG

The Yale HTG Manual Gear Travel Trolley enables the exact positioning of a load suspended on a structural section ("I" Beam). The HTG is fitted with a gearing system  and hand chain that aids the precise positioning of the trolley  anywhere along the beam - once in position, the trolley will not creep out of position like the push travel trolley.

£139.98 ex VAT

£167.98 inc VAT

HTG - Yale Gear Travel Trolley with Extended Bar

HTG

The Yale HTG Manual Gear Travel Trolley enables the exact positioning of a load suspended on a structural section ("I" Beam). The HTG is fitted with a gearing system  and hand chain that aids the precise positioning of the trolley  anywhere along the beam - once in position, the trolley will not creep out of position like the push travel trolley

£157.98 ex VAT

£189.58 inc VAT

HW-C Yale Spur Gear Drive Manual Wire Rope Winch

HW-C

The HW-C is a Spur Gear driven manual Wire Rope Winch. Ideal for mounting on walls, poles, towers or horizontally mounted.

£59.16 ex VAT

£70.99 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up