Probst AL Block Cutter Spare Blade

The official Probst original replacement blades for the AL Easy Block Cutter (Block Cutter Part Number 512000059) Probst Block Cutter AL Easy. Can replace a broken Probst Block Cutter blade quickly and easily.

The Square or 4 sided Knife or blade gives a very clean and precise cut to any block paving block. The blade can be turned when one side has been damaged, giving 4 cutting edges before the blade needs to be replaced

The AL33 Block Cutter has a four-sided square blade top and bottom - The blade can be bought singular - Please note that two (2) spare blades are required in total - 1 x Top and 1 x Bottom, or you can just change one only if only 1 damaged or broken

The above replacement blades suit the Probst AL33 Block Cutter 512000059 only, which has been discontinued by PROBST and replaced with the Probst STS-33-F Block Cutter.

Introductions into the new Probst STS-33-F Block Splitter

The STS-33-F Block and Stone Splitter is the newly designed block cutter from Probst material handling, with more splitting force that reduces effort required by the operator. Which in turn creates a clean cut on Block Paving Blocks and similar products with ease. Supplied with a set of two cutting blades.

This Probst Stone and Block Splitter has been developed to cut or snap the blocks easily by using less force by the operator. This simple and easy to use device will give a clean and perfectly formed new edge to your paving blocks or stones without dust, noise and no water is needed to aid in the operation. Therefore no particulate emissions occur, so it is safer for the operator to use.

The Probst STS-33-F block cutter is fitted with the newly designed triangular shaped cutting blade, that give a cleaner more accurate cut over the older square style bladed that was fitted to the discontinued Probst AL33 Block Cutter

The Probst STS-33-F Block and Stone Cutter with a tilted, rigid supporting table, this makes sure all blocks are cut at the same angle.