Probst STS-33-F Block Cutter Spare Blade

The official Probst original replacement blades for the STS-33-F Block Cutter (Block Cutter Part Number 512000076) Probst Stone Splitter. Can replace a broken Probst Block Cutter blade quickly and easily. The new style triangular Knife or blade gives a clean and accurate cut to any block paving block.

The STS Block Cutter has a blade top and bottom - The Triangular blade can be bought singular - Please note, Two (2) spare blades are required in total - 1 x Top and 1 x Bottom, or you can just change one only if only 1 damaged or broken

The above replacement blades will only suit the Probst Block Cutter 512000076

Probst STS-33-F Stone Splitter

The Probst STS-33-F Block and Stone Splitter is the newly designed block cutter from German manufacturer Probst Material Handling. The block cutter has more splitting force that reduces the effort required by the operator. Which in turn creates a clean cut on Block Paving Blocks and similar products with ease. Supplied with a set of two cutting blades.

This Probst Stone and Block Splitter has been developed to cut or snap the blocks easily by using less force by the operator. This simple and easy-to-use device will give a clean and perfectly formed new edge to your paving blocks or stones without dust, or noise, and no water is needed to aid in the operation. Therefore no particulate emissions occur, so it is safer for the operator to use.

The Probst STS-33-F block cutter is fitted with the newly designed triangular-shaped cutting blade, which gives a cleaner more accurate cut over the older square-style blade that was fitted to the discontinued Probst AL33 Block Cutter

The Probst STS-33-F Block and Stone Cutter are supplied with a tilted, rigid supporting table, make sure all blocks are cut at the same angle.