Get in touch01384 986 026

We Accept:

Lifting Wheel Barrow Replacement Bucket - 200Kgs

Estimated lead time:1 Day

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

Lifting Wheel Barrow Replacement Bucket - 200Kgs

Brand:

Description

Replacement Bucket only to suit the Liftable Wheelbarrow, rated to 200Kgs - Hard wearing polypropylene tray

£94.98 ex VAT

£113.98 inc VAT

Related products

Lifting Wheel Barrow - 200Kgs

860001

Industrial quality Liftable Wheelbarrow, rated to 200Kgs is a safe and easy way of lifting or lowering wet or loose materials via a hoist on any building site.

These units are fitted with a central lifting point for fast and secure connection to a scaffold hoist or any other builders hoist.

£209.00 ex VAT

£194.98 ex VAT

£233.98 inc VAT

These are replacements buckets for industrial quality Lifting Wheelbarrow rated to 200Kg. The moulded bucket that has a good sized 100 litre capacity for liquid or 6cu.ft capacity for sand making it a great choice to be used within the construction and renovation sectors.

ModelCapacityColourWeight
860001
200KgsRed, Yellow, Blue19.5kgs

Body - Hard wearing polypropylene tray

Capacity - 6cu.ft for sand / 100litres for liquid (Water)
Working Temperature - -50c to +60c
Tray Colour - Yellow , Red , Blue
Weight - 19.5 Kgs when Empty
Key Points for Liftable Wheel barrow Replacement Bucket

Capacity - 200Kgs

Body - Hard wearing polypropylene tray

Capacity - 6cu.ft for sand / 100litres for liquid (Water)

Working Temperature - -50c to +60c

Tray Colour - Yellow , Red , Blue

Weight - 19.5 Kgs when Empty

Write a review

More products from category:

Lifting Equipment

Crosby Straightpoint RLP Radiolink Plus c/w Wireless Handheld Display

RLP

The Crosby Straightpoint Radiolink Plus is a Wireless Tension Load Cell c/w Handheld display capable of weighing and dynamic load monitoring from 1t up to 500t. All sizes are DNV-GL approved. The versatile RLP is supplied with the updated rate of 3Hz and can be easily configured to run at industry-leading speeds of up to 200Hz - ideal for dynamic forces measurement.
DM200i Scaffold Hoist - 200Kgs

DM200i

The DM200i is a 200Kgs rated Quality Scaffold Hoist that comes with swivelling bracket for direct fit to scaffold tubes, a Lifting height of up to 25m, and a fast lifting speed of 25 metres per minute. Industrial quality hoists aimed at professional builders

£954.99 ex VAT

£764.98 ex VAT

£917.98 inc VAT

DSR S Pfaff Wire Rope Sheaves

DSR-S

The DSR S Wire Rope Sheaves are available in a wide variety of pulley diameters, manufactured from high quality wear resistant steel. Supplied with bearings.

£75.60 ex VAT

£90.72 inc VAT

DSRB Pfaff Wire Rope Sheave Blocks

DSRB

Pfaff DSRB Wire Rope sheave blocks are suitable for both manual and electric driven wire rope winches. These dynamic all rounders with variable rope and sheave diameters and cable deflection op up to 180° can move loads of up to 8 tonne with ease and reliability.

£98.98 ex VAT

£118.78 inc VAT

Geosynthetic Liner Lifting Beam

ISB

Our Geosynthetic Liner Lifting beam system comes complete with everything you need to lift liner rolls, can also be used for any type of pond lining and even carpet. In these lifting kits is the Beam itself, two leg top lifting chains, the dropper chains, and the spindle to slide your liner over. For everything you need, just add the liner roll.

£2,989.98 ex VAT

£3,587.98 inc VAT

HTG - Yale Gear Travel Trolley (Type A)

HTG

The Yale HTG Manual Gear Travel Trolley enables the exact positioning of a load suspended on a structural section ("I" Beam). The HTG is fitted with a gearing system  and hand chain that aids the precise positioning of the trolley  anywhere along the beam - once in position, the trolley will not creep out of position like the push travel trolley.

£139.98 ex VAT

£167.98 inc VAT

HTG - Yale Gear Travel Trolley with Extended Bar

HTG

The Yale HTG Manual Gear Travel Trolley enables the exact positioning of a load suspended on a structural section ("I" Beam). The HTG is fitted with a gearing system  and hand chain that aids the precise positioning of the trolley  anywhere along the beam - once in position, the trolley will not creep out of position like the push travel trolley

£157.98 ex VAT

£189.58 inc VAT

HW-C Yale Spur Gear Drive Manual Wire Rope Winch

HW-C

The HW-C is a Spur Gear driven manual Wire Rope Winch. Ideal for mounting on walls, poles, towers or horizontally mounted.

£59.16 ex VAT

£70.99 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up