Get in touch01384 986 026

We Accept:

Stahl STH Pendant Control Station (4 Button)

Key notes for ordering:

Supplied with 2.5m Pendant and 9 Pin Plug

Estimated lead time:1 to 2 days

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

Stahl STH Pendant Control Station (4 Button)

Brand:

Description

Official Replacement Stahl STH Corded 4 button Pendant Control Station for both dual speed hoisting and dual speed cross travel motion, supplied complete with 3m cable and 9-Pin Plug assembly for easy on site fitment. Other lengths available

£469.98 ex VAT

£563.98 inc VAT

Other Pendant Cable Lengths available

Related products

Official Replacement Stahl STH Corded 4 button Pendant Control Station complete with 3m cable and 9-Pin Plug assembly for easy on site fitment. these Stahl replacement pendants only suit Stahl Hoists with both dual Speed lift/lower and dual speed cross travel motion, for Stahl 2 button pendants and for other manufacturers, please call the ULS Lifting Spares team today on 01384 986 026.


Stahl four button Pendant Control Station complete with standard 3m cable length. For other length cables, please call to discuss your requirements. Supplied pre-wired for Dual Speed Hoisting and Dual speed cross travel motion only - If your hoist does not have powered travel, please see our Two Button Stahl Pendant for Hoisting Motion Only.


These Quality pendant stations are manufactured for Stahl by top manufacturer Schneider under licence and supplied in Stahl distinctive red colour. These Robust Housing are IP65 rated. supplied with Dual Speed Lift and Lower as well as Dual Speed Trolley Travel Left and right. Also Supplied with Emergency Stop.


If you require any other cable length, feel free to call for an instant quotation - Call Ultimate Lifting Solutions Crane and Hoist Spares Department on 01384 986 026 





Write a review

More products from category:

Lifting Equipment

Crosby Straightpoint RLP Radiolink Plus c/w Wireless Handheld Display

RLP

The Crosby Straightpoint Radiolink Plus is a Wireless Tension Load Cell c/w Handheld display capable of weighing and dynamic load monitoring from 1t up to 500t. All sizes are DNV-GL approved. The versatile RLP is supplied with the updated rate of 3Hz and can be easily configured to run at industry-leading speeds of up to 200Hz - ideal for dynamic forces measurement.
DM200i Scaffold Hoist - 200Kgs

DM200i

The DM200i is a 200Kgs rated Quality Scaffold Hoist that comes with swivelling bracket for direct fit to scaffold tubes, a Lifting height of up to 25m, and a fast lifting speed of 25 metres per minute. Industrial quality hoists aimed at professional builders

£954.99 ex VAT

£764.98 ex VAT

£917.98 inc VAT

DSR S Pfaff Wire Rope Sheaves

DSR-S

The DSR S Wire Rope Sheaves are available in a wide variety of pulley diameters, manufactured from high quality wear resistant steel. Supplied with bearings.

£75.60 ex VAT

£90.72 inc VAT

DSRB Pfaff Wire Rope Sheave Blocks

DSRB

Pfaff DSRB Wire Rope sheave blocks are suitable for both manual and electric driven wire rope winches. These dynamic all rounders with variable rope and sheave diameters and cable deflection op up to 180° can move loads of up to 8 tonne with ease and reliability.

£98.98 ex VAT

£118.78 inc VAT

Geosynthetic Liner Lifting Beam

ISB

Our Geosynthetic Liner Lifting beam system comes complete with everything you need to lift liner rolls, can also be used for any type of pond lining and even carpet. In these lifting kits is the Beam itself, two leg top lifting chains, the dropper chains, and the spindle to slide your liner over. For everything you need, just add the liner roll.

£2,989.98 ex VAT

£3,587.98 inc VAT

HTG - Yale Gear Travel Trolley (Type A)

HTG

The Yale HTG Manual Gear Travel Trolley enables the exact positioning of a load suspended on a structural section ("I" Beam). The HTG is fitted with a gearing system  and hand chain that aids the precise positioning of the trolley  anywhere along the beam - once in position, the trolley will not creep out of position like the push travel trolley.

£139.98 ex VAT

£167.98 inc VAT

HTG - Yale Gear Travel Trolley with Extended Bar

HTG

The Yale HTG Manual Gear Travel Trolley enables the exact positioning of a load suspended on a structural section ("I" Beam). The HTG is fitted with a gearing system  and hand chain that aids the precise positioning of the trolley  anywhere along the beam - once in position, the trolley will not creep out of position like the push travel trolley

£157.98 ex VAT

£189.58 inc VAT

HW-C Yale Spur Gear Drive Manual Wire Rope Winch

HW-C

The HW-C is a Spur Gear driven manual Wire Rope Winch. Ideal for mounting on walls, poles, towers or horizontally mounted.

£59.16 ex VAT

£70.99 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up