FLTS2013 Forklift Tipping Skip

The FLTS 2013 quality built Forklift Tipping Skip is a perfect solution for moving waste or materials around a factory floor, construction site or any situation that requires storage and transportation of loose materials or scrap and waste. The FLTS2013 Tipping Skip stand out from other manufacturers tipping skips and even our own standard forklift mounted tipping skip, because they have the addition of fixed heel pins as standard on all 4 models.

Why Fit Heel Pins to Tipping Skips - Once the tipping skip has been correctly located on the forklift fork tines, it is totally safe and secure and locked into place, the skip will not slip or slide off the forklift. This means no extra safety restraint chains are required to secure the tipping skip to the forklift.

The added advantage of the FLTS2013 range of tipping skips is the four way fork pocket entry. which means this quality tipping skip can be located exactly where required and the tipping skip can be lifted from the front or rear and can be lifted from both the left side and right side and lifted and transported away easily. 

Key features 

• 4 Standard sizes available.
  
• Capacities from 500 litres to 1750 litres
• Four way Fork pocket Entry
• Fixed Heel Pins and Tear Drop safety Catch
• Folded Lip for extra strength and durability
• Special Crane Lift Version available - see separate page

Idea for transfer materials/rubbish around any construction site or engineering factory environment. Designed purposely to be filled with any type of waste or loose materials around a builders site, farm, factory or yard. 

Can be supplied with castors - All ULS FLTS Tipping Skips can be supplied with quality hard wearing polyurethane castors to help move the skip by hand into tight spaces. supplied with two fixed and two swivel castors.

What is the difference between tipping skips? That Ultimate Lifting Solutions Ltd Supply?

The main difference between tipping skips is the material they are manufactured from . Our Standard Forklift Tipping Skip are manufactured in the UK from 3mm Quality steel plate, the Heavy Duty Tipping Skips are manufactured in he UK from a thicker plate of 5mm. The advantage of the standard DTS tipping skip is the overall weight is less, making it easier to maneuverer around the factory and site and will be better suitable for smaller forklifts. The HDI Heavy Duty Industrial Tipping Skip manufactured from a heavier gauge steel plate makes the units more durable and suited on construction sites that will have bigger waste products added to it.

Design Difference between standard skip and the heavy duty tipping skip?

The DTS Tipping skip are manufactured with a folded back lip all around the bucket area, this double folded lip adds extra strength to the whole skip area, this helps the skip to keep its shape longer and again makes them suitable for building sites, construction sites and factories that are using the tipping skips for waste products such as steel, rubble, bricks, roof slates and other site materials such as installation materials, wood and plasterboard. The HDI Heavy Duty Industrial Tipping Skip has a thicker body material and are manufactured with a more simple folded edge, this is all these model requires to give the heavy duty tipping skip its strength and durability to withstand the onsite conditions it has been designed for.