Get in touch01384 986 026

We Accept:

125Kgs SWL Free Standing Jib Crane - Over Braced

Key notes for ordering:

Dispatched as a kit with instructions, Customer can decide on extras like isolator for electrics, festoon system for elec hoist. Contact us for installation prices. Suppled fully tested with certification

Estimated lead time:Manufactured in UK to Order - Approx. 2 - 3 Weeks Delivery

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

125Kgs SWL Free Standing Jib Crane - Over Braced

Brand:

Capacity

125Kgs

Description

125Kgs SWL Free Standing Jib Crane - Over Braced are manufactured fully tested, certified, and ready to install. Supplied in a simple two-part kit form. Both the arm and pillar can be manufactured to any length between 2m and 6m and the arm is designed to slew through 270° giving a very wide working area. 

£1,009.98 ex VAT

£1,211.98 inc VAT

Please contact our sales team if the following extras are required:

1 - Adjustable Slew Limits
2 - Slewing Lock
3 - Installation

Related products

125Kgs SWL Free Standing Jib Crane c/w Electric Hoist - Over Braced

FJC

125Kgs SWL Free Standing Jib Crane c/w Electric Hoist - Over Braced version that is manufactured in the UK. These Freestanding Jib crane kits, come complete with an Electric Chain hoist as standard and are manufactured and delivered in a simple two-part jib crane kit form. 

£1,009.98 ex VAT

£1,211.98 inc VAT

125Kgs SWL Free Standing Jib Crane - Under Braced

UBFJC

125Kgs SWL Free Standing Jib Crane - Under Braced version is manufactured in the UK, supplied fully certified, and designed for areas of low height. Both the arm and column can be manufactured to any length between 2m-6m with a slew angle of 270° giving a very wide working area. 

£1,228.98 ex VAT

£1,474.78 inc VAT

125Kgs SWL Free Standing Jib Crane - Over Braced are manufactured fully tested, certified, and ready to install. Supplied in a simple two-part kit form. The slewing arm which the hoist will move along, and the pillar that the swing arm fits to. Both the slewing arm and upright pillar can be manufactured to any length between 2m and 6m and the arm is designed to slew through 270° giving a very wide working area. The arm is supplied with a trolley already fitted, making it even more simple for connecting to your hoist, spring balancer, or vacuum lifter.  If you require an electric hoist or manual hoist to fit to the floor-mounted over-braced jib then please call our sales team for assistance on 01384 986 026 or email on sales@ulslifting.com.


Dimensions for illustration only - Based on 125Kgs Free Standing over-braced Swing Jib with 3m Overall height.

Model
SWL
Working Height to the underside of a beam
Overall height of Jib
Trolley depth
Arm Length (Radius of reach)
Total Weight
FJC125R3
125Kgs
2,250mm (2.25m)
3,000mm (3m)
77mm
3,000mm (3m)
210Kgs
FJC125R4
125Kgs
2,200mm (2.2m)
3,000mm (3m)
77mm
4,000mm (4m)
220Kgs
FJC125R5
125Kgs
2,100mm (2.1m) 
3,000mm (3m)
94mm
5000mm (5m)
270Kgs
FJC125R6
125Kgs
2,000mm (2.0m) 
3,000mm (3m)
94mm
6,000mm (6m)
355Kgs


Why Choose a 125Kgs SWL Free-Standing Jib Crane - Over Braced?

There are many advantages to purchasing a free-standing Jib Crane, they are extremely versatile within the factory, speeding up the lifting and moving of components off presses or workbenches, and loading or unloading lorries. Lifting heavy objects such as granite, timber, or steel.

Jib cranes are made up of two main parts, the pillar, and the arm, therefore a simple manual jib crane does not have many parts to maintain, making them extremely reliable, which in turn means they do not break down, so no loss in production time. 


Easy to install.

The 125Kgs SWL Free Standing Jib Crane - Over Braced version simply bolts to the floor via the Jib Crane base plate and chemical resin anchor bolts. Once you have checked your floor is suitable for a jib crane and bought it, we arrange to manufacture the jib, and then when it is supplied to the site, the floor just needs to be drilled and the floor mounting plate secured -  We at Ultimate Lifting Solutions offer this service and can offer full installation by using our own highly trained engineers or just the commissioning/ load testing, we can offer a package to meet your requirements.

Because of the simple design, they are inexpensive to both buy and maintain compared to other cranes. Under normal working conditions, they will only need an industry standard 12 monthly services. We at Ultimate Lifting Solutions offer this service and can offer various maintenance/service packages to meet your requirements.


How does a Swing Jib Crane work?

A standard swing Jib as mentioned has two main parts - The Pillar and the Arm. The arm can rotate from left to right and vice versa the swing or slew angle is set at 270° as standard. On all our swing jibs up to 1,000Kgs, they will slew with ease without the requirements of powered assistance, hence keeping the costs down.

The arm on our Jib cranes is supplied with a trolley, which moves up and down the full length of the arm, this trolley gives you the reach and flexibility to reach into corners of your factory with ease. 


What else is required for a 125kgs SWL Free Standing Jib Crane - Over Braced?

You now have your Swing Jib fitted. You now need a hoist, these fit easily to the trolley that was supplied free of charge with the freestanding jib crane.  You just need to decide what hoist you need. To keep the costs down a manual hoist is the cheapest option, but you will not save on production time, as they are slow and do need assistance by hand, and sometimes for larger items, you might not be able to reach them. The second option and best option is an Electric Hoist, these hoists enable you to easily lift and lower your components quickly, cutting down on production time, and it will soon pay for itself in time saved.


Installation.

As mentioned above, The 125Kgs SWL Free Standing Jib Crane - Over Braced version can be an easy install due to its lightweight design, once installed and the hoist fitted, all that is left is commissioning, testing, and signing off the Jib as safe to use. we are more than happy for all our customers to install themselves or find their own installation team. We are also more than happy to offer our own engineers to take away this task. We can install the Jib, install the Hoist, commission, and test and we will not leave the site until everything is working correctly and safely.  

125Kgs SWL Free-Standing Jib Crane - Over Braced

All our manufactured Jibs are duty classification:  A3 according to BS 733: 1990. 

All jibs are lubrication free. The pivot bushes are acetal and therefore do not require lubrication. The trolleys running surfaces are also lubrication free.

Manual slewing and trolley travel operation. 

Minimal maintenance requirement. 

The clutch-controlled slewing mechanism can be tightened/loosened to control how freely the arm pivots.  

Bases are fully welded to the column – in most situations, this removes the need for an oversized load spreading plate or setting an anchor frame into concrete, therefore making installation much quicker and more cost-effective.   


Key Points of our UK-manufactured Jib Cranes

SWL - 125kg,

Pillar Height - 2m up to 6m 

Arm length - 2m up to 6m 

Slew Angle - a 270-degree manual slew

Trolley - Fitted with integrated push travel trolley for suspending hoists, vacuum lifters and tool balancers from

Fast delivery - We aim to deliver all our Swing Jibs within 10 to 14 days


Optional extras

Adjustable slewing limits, To reduce the swing arc

Slewing lock, to fix the arm into a specific position

Electrical Isolator - required if electric hoist to be used in conjunction with hoist, can be fitted either flush mounted or face-mounted on Pillar/column


Full Electric Kit - Our kit includes everything required to run Electric Hoist (Isolator, Flatform Supply Cable, Cable Runners)


Optional Floor Fixing Bolts

125Kgs SWL Free-Standing Jib Crane - Over Braced as a rule does not need much service or maintenance. Yet, general observations of the overall condition of the jib and the hoist connected to it can be carried out by the operator - any faults should be reported immediately.


More importantly to keep the Jib and hoists running at maximum efficiency and to keep within the UK laws regarding LOLER inspections set out by HSE, both the Jib and the hoist on it should have a maintenance service scheduled no later than 12 months. This service should be undertaken by qualified service engineers - If you would like to know more about the servicing and general maintenance, please feel free to contact us, we do have qualified engineers and are happy to quote for all your crane servicing requirements.

Write a review

More products from category:

Lifting Equipment

110 volt Scaffold Hoist 200Kg Capacity

DM200i

110 volt Scaffold Hoist 200Kg Capacity supplied with a swivel bracket for direct fit to scaffold tubes, a Lifting height of 25m, and a lifting speed of 25 metre per minute. Quality hoist aimed at professional builders and heavy-duty lifting. The DM200I is becoming a favourite among our customers and quickly becoming a Top Selling product.

£954.99 ex VAT

£764.98 ex VAT

£917.98 inc VAT

125Kg Yale CPS Electric Chain Hoist

YALE CPS 125

125Kg Yale CPS Electric Chain Hoist is a small, lightweight hoist with top hook suspension for easy attachment to most suspension points. Available in 110 volt, 230 volt, or 400 volt power supply. Weight of only 12Kgs

£1,392.03 ex VAT

£1,670.44 inc VAT

250Kg Yale CPS Electric Chain Hoist

YALE CPS 250

250Kg Yale CPS Electric Chain Hoist is a small, lightweight hoist with top hook suspension for easy attachment to most suspension points. Available in 110 volt, 230 volt, or 400 volt power supply. Weight of only 14Kgs

£1,476.82 ex VAT

£1,772.18 inc VAT

360 Degree Column Jib Crane 250Kg Capacity

RJC

360 Degree Column Jib Crane offers total flexibility within the workplace. The crane arm has full rotation around the main upright column, providing a complete circular lifting aid of up to 6m. Overall column height can be manufactured up to 6m Tall

£1,698.98 ex VAT

£2,038.78 inc VAT

BlueLink Bluetooth Digital Dynamometer

BLD6T5

Crosby Straightpoint BlueLink Bluetooth Digital Dynamometer is a compact and lightweight loadcell that has been designed to minimize headroom, standing at only 156mm (6.14") from eye to eye. Wireless Bluetooth allowing the User to stand at a safe distance from the load

£1,069.98 ex VAT

£1,283.98 inc VAT

CM BatteryStar Battery 1000Kgs Powered Chain hoist

CM BatteryStar

The CM BatteryStar is the brand new Battery Powered Chain hoist that has been built with industry-leading technology from Columbus McKinnon and Milwaukee Tool. Designed for portability and easy installation, the BatteryStar can have you lifting in minutes. Supplied without Battery/Charger as standard

£2,498.98 ex VAT

£2,998.78 inc VAT

Crosby Straightpoint RLP Radiolink Plus Bluetooth Version

RLP BLE

Crosby Straightpoint RLP Radiolink Plus Bluetooth Version is a Wireless Tension Load Cell designed to be used with the SW-HHP Insight Software or can be Bluetooth.

£1,560.68 ex VAT

£1,872.82 inc VAT

Crosby Straightpoint RLP Radiolink Plus c/w Wireless Handheld Display

RLP

Crosby Straightpoint RLP Radiolink Plus c/w Wireless Handheld Display is a Wireless Tension Load Cell capable of weighing and dynamic load monitoring from 1 tonne up to 500 tonnes.

£2,465.98 ex VAT

£2,959.18 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up