Get in touch01384 986 026

We Accept:

Request A Quote Checkout

Ratchet Lever Hoist to EN13157

Key notes for ordering:

Supplied tested with certification - Ready to use from the box

Estimated lead time:1 Day

Please call us if you need this item sooner

CLICK
& COLLECT
Next day
delivery
SAME DAY
DELIVERY
(Call us)

Seen this product cheaper elsewhere?

We will always try to offer this product at the best price. We will do our best to not just match it but to beat it.

Price match
promise

Ratchet Lever Hoist to EN13157

Brand:

Capacity

750Kgs up to 9,000Kgs
(0.75ton to 9 ton)

Description

The Xona Blue is a high quality rugged industrial performing lever hoist. Light weight in design with steel constructed body giving an impact resistant high strength lever hoist. Manufactured and tested to EN13157 and fitted with EC manufactured EN818-7 Grade T Hoist Chain.

£88.88 ex VAT

£106.66 inc VAT

Add to cart Add to quote

Related products

Yale UNOplus Series A Lever Hoist

UNOplus-A

The Yale Uno Plus Series A Lever hoist is a newly improved design offering a versatile ratchet lever hoist designed for both pulling and lifting. Can also be used for lashing loads.

£167.98 ex VAT

£201.58 inc VAT

Xona Black Lever Hoist to EN13157

Xona Black LH

The Xona Black is a high quality rugged industrial performing lever hoist. Specifically targeted at the entertainment, theatre & hospitality sector due to its Matt finish on the body of hoist, load chain and safety catches. Light weight in design with steel constructed body giving an impact resistant high strength lever hoist. Manufactured and tested to EN13157

£86.98 ex VAT

£104.38 inc VAT

Xona Black Chain Block to EN13157

Xona Black CB

The Xona Black is a rugged industrial quality chain block. Specifically targeted at the entertainment, theatre & hospitality sector due to its Matt black finish on hoist body, load chain and safety catches. (hand Chain electro galv). Built to high specifications that has produced a reliable, high strength hoist easily capable of fulfilling any lifting task performed onsite or within the factory environment. Manufactured and tested to EN13157 and fitted with EC manufactured EN818-7 Grade T Hoist Chain.

£73.98 ex VAT

£88.78 inc VAT

Xona Beam Clamp with Eye

XNHNBCLAMP

Xona Black Beam Clamps provide a quick and versatile rigging point to attach hoisting equipment such as chain hoists, lever hoists, pulley blocks, etc to structural steelwork. Matt black finish makes this quality beam clamp suitable for the Entertainment, Theatre, and Hospitality sectors. Will fit most "I" beam flanges.

£32.68 ex VAT

£39.22 inc VAT

GT Viper Lever Hoist

VLH

The GT Viper Lever Hoist can be considered lightweight in design yet manufactured to be a robust and very reliable ratchet hoist for industrial tasks. Therefore, offering a low-cost universal lifting device for everyday tasks

£66.98 ex VAT

£80.38 inc VAT

GT Viper Adjustable Beam Clamp

VBC

The GT Viper Adjustable Beam Clamp is quick and easy to install to give a safe and secure anchor point off most overhead beam sizes. These heavy duty beam clamps are supplied in a matt black finish with LOLER certification  

£36.98 ex VAT

£44.38 inc VAT

The Xona Blue is a high quality rugged industrial performing lever hoist. Light weight in design with steel constructed body giving an impact resistant high strength lever hoist. Manufactured and tested to EN13157 and fitted with EC manufactured EN818-7 Grade T Hoist Chain Electro Galv finish as standard - We can also supply Black powder coat chain to the same quality.

The Xona range of lever hoists

Model
Capacity
Chain Dimensions
Lifting Height
Closed Height
Weight
XNHBLH0.75T
750Kgs
6 x 18mm
1.5m
295mm
6.9Kgs
XNHBLH1T
1000Kgs
6 x 18mm
1.5m
310mm
7.1Kgs
XNHBLH1.5T
1500Kgs
8 x 24mm
1.5m
335mm
9.7Kgs
XNHBLH3T
3000Kgs
10 x 30mm
1.5m
405mm
16.3Kgs
XNHBLH6T
6000Kgs
10 x 30mm
1.5m
550mm
26.7Kgs
XNHBLH9T
9000Kgs
10 x 30mm
1.5m
680mm
38.5Kgs
The standard Height of lift is 1.5m - Any additional height of lift is available.
Specification for Xona Blue Lever Hoists

High quality manufactured design for rugged industrial performance.
High strength, light weight body, cold formed steel construction giving impact resistance for longer life.
360º handle rotation with short stroke to quickly ratchet loads.
Compact design for minimal effort.
Chain guides fitted as standard to provide smooth chain operation.
Single hand “free chaining” is simple and convenient allowing smooth trouble free operation in the vertical or horizontal position.
Twin pawl as standard to avail slipping chain.
For fleeting/cross hauling. Please contact our technical department for information.
Caged needle roller bearing on load sprocket as standard.
Powder coat finish for durable corrosion protection.
Specially designed hard wearing rubber grip for added operator comfort.
Top and bottom hook housing. Bolts and nylon nuts for easy inspection.
Forged upper and lower hooks with heavy duty cast safety latch. spares readily available
Hook overload stretch indicator marks. For easy checking if any distortion has occurred due to misuse or overloading.
Cast enlarged end ring.

Overload protection limiter available on request.

EC Manufactured EN818-7 Grade – T Hoist Chain.
Available in Black and Electro Galvanised.
INSPECTION BEFORE STARTING WORK
Before starting work, inspect the unit including the suspension, equipment and supporting structure for visual defects, e. g. deformations, superficial cracks, wear and corrosion marks.
In addition also test the brake and check that the hoist and the load are correctly attached.
Checking the brake function Before starting work, always check operation of the brake: To do this, lift, pull or tension and lower or release a load over a short distance with the unit. When the hand lever is released, the load must be held in any position.This check is intended to ensure that even at temperatures below 0°C, the brake disks are not frozen. Repeat it at least twice, before starting further work.

Hoist supplied fully tested in good working order. 
Supplied with operating instructions and relevant conformity certificate.

According to national and international accident prevention and safety regulations hoisting equipment must be inspected:
• in accordance with the risk assessment of the operating company
• prior to initial operation
•before the unit is put into service again following a shut down
• after substantial changes
• however, at least once per year, by a competent person.

Please contact our Sales Team @ ULS if you require your annual servicing on this product or any similar products.

Write a review

More products from category:

Lifting Equipment

110 Volt Scaffold Hoist 200kg Capacity

DM200i

The 110-volt Scaffold Hoist has a 200 kg capacity and comes with a swivel bracket for direct attachment to scaffold tubes. It features a lifting height of 25 meters and a lifting speed of 25 meters per minute. This high-quality hoist is designed for professional builders and heavy-duty lifting. The DM200I is quickly becoming a customer favorite and one of our top-selling products.

£794.98 ex VAT

£953.98 inc VAT

360 Degree Column Jib Crane 250Kg Capacity

RJC

360 Degree Column Jib Crane offers total flexibility within the workplace. The crane arm has full rotation around the main upright column, providing a complete circular lifting aid of up to 6m. Overall column height can be manufactured up to 6m Tall

£1,698.98 ex VAT

£2,038.78 inc VAT

BlueLink Bluetooth Digital Dynamometer

BLD6T5

Crosby Straightpoint BlueLink Bluetooth Digital Dynamometer is a compact and lightweight loadcell that has been designed to minimize headroom, standing at only 156mm (6.14") from eye to eye. Wireless Bluetooth allowing the User to stand at a safe distance from the load

£1,069.98 ex VAT

£1,283.98 inc VAT

CM BatteryStar Battery 1000Kgs Powered Chain hoist

CM BatteryStar

The CM BatteryStar is the brand new Battery Powered Chain hoist that has been built with industry-leading technology from Columbus McKinnon and Milwaukee Tool. Designed for portability and easy installation, the BatteryStar can have you lifting in minutes. Supplied without Battery/Charger as standard

£2,498.98 ex VAT

£2,998.78 inc VAT

Crosby Straightpoint RLP Radiolink Plus Bluetooth Version

RLP BLE

Crosby Straightpoint RLP Radiolink Plus Bluetooth Version is a Wireless Tension Load Cell designed to be used with the SW-HHP Insight Software or can be Bluetooth.

£1,560.68 ex VAT

£1,872.82 inc VAT

Crosby Straightpoint RLP Radiolink Plus c/w Wireless Handheld Display

RLP

Crosby Straightpoint RLP Radiolink Plus c/w Wireless Handheld Display is a Wireless Tension Load Cell capable of weighing and dynamic load monitoring from 1 tonne up to 500 tonnes.

£2,465.98 ex VAT

£2,959.18 inc VAT

DSR S Pfaff Wire Rope Sheaves

DSR-S

The DSR S Wire Rope Sheaves are available in a wide variety of pulley diameters, manufactured from high quality wear resistant steel. Supplied with bearings.

£76.98 ex VAT

£92.38 inc VAT

DSRB Pfaff Wire Rope Sheave Blocks

DSRB

Pfaff DSRB Wire Rope sheave blocks are suitable for both manual and electric driven wire rope winches. These dynamic all rounders with variable rope and sheave diameters and cable deflection op up to 180° can move loads of up to 8 tonne with ease and reliability.

£101.98 ex VAT

£122.38 inc VAT

View all

SUBSCRIBE FOR THE LATEST NEWS & SPECIAL OFFERS

Sign up here to get the latest news, updates and special offers delivered to your inbox.

Sign Up